Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mentone, CA
Gate installation in Mentone usually runs between $1,800 and $7,500 depending on the gate’s width, material, and whether it’s automated. Homes here sit on large foothill lots with long driveways, so the work leans toward wide, heavy-duty gates built from steel, wrought iron, or custom chain-link rather than standard suburban panels. Estate Gate Repair handles the full installation, from setting posts in Mentone’s sandy, fast-draining soil to wiring operators for automated systems. Call (866) 893-2220 for a free on-site estimate.
Why Mentone Homes Are Different
Mentone sits in the foothills of the San Bernardino Mountains, and that location shapes every gate job we do here. Wind-driven dust and grit from the open desert and nearby wash areas infiltrate gate tracks, hinges, and rollers far faster than in neighboring lowland cities like Redlands, CA. Hot, dry summers and seasonal Santa Ana winds blast fine sand against metal, drying out lubricants and causing rollers and latches to seize or misalign. After a Santa Ana event, we routinely find gate tracks packed solid with fine grit from the foothills, which is why our techs carry a leaf blower on every Mentone call to clear tracks before diagnosing alignment or motor problems. The housing stock here is mostly older single-family homes on large lots, many with long rural-style driveways that need wide gates and custom fence runs. That’s different from the tighter, newer subdivisions you see downhill, and it means a gate installed in Mentone has to handle more wind load, more dust, and more daily cycles than one in a flat tract neighborhood.
Styles & brands we work with
Our Main Mentone Services
Most Mentone homeowners reach us for one of two reasons: a gate that has stopped working or an electric operator that has failed. Here’s how each works in this area.
Gate Repair in Mentone
Gates in Mentone take a beating from wind, dust, and temperature swings. Rollers seize, hinges sag, welded joints crack, and chain-link fabric pulls loose from its frame. Our repair work starts with clearing the track and checking alignment, because grit from nearby wash areas is often the root cause of a gate that drags or jams. We replace worn rollers, rebuild hinge posts, re-tension chain-link, and weld cracked steel. We work on the brand you already have. Gate Repair in Mentone covers mechanical fixes on manual and automated gates alike.
Electric Gate Repair in Mentone
When a gate operator stops responding, the problem is usually in the motor, the control board, or a safety sensor knocked out of alignment by wind. Mentone’s dust also gets inside control boxes and onto circuit boards, which causes intermittent failures that are easy to misdiagnose. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. From the motor to the control board, we diagnose first and replace only what’s needed. Electric Gate Repair in Mentone covers the electrical and electronic side of the system.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Mentone
Gate installation in Mentone almost always involves a wider opening and a heavier gate than what a standard suburban home requires. Many properties here were built decades ago as rural or semi-rural lots, so driveways are long, set back from the road, and often framed by chain-link or wrought-iron fence lines. Automated gates in particular have to stand up to Santa Ana wind gusts and constant fine dust, so we size operators conservatively and use hardware that won’t bind when grit gets into the track. If you’re in the 92359 ZIP and planning an automated gate, expect the job to include the gate itself, the operator, safety edges, and the power run from your house to the gate post. Gate Installation covers everything from a basic manual gate to a fully automated driveway system.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand every day, or your current operator is too weak for the gate’s width and weight.
What it costs in Mentone
Automatic gate installation in Mentone typically runs $3,500 to $7,500 depending on gate size, operator type, and the length of the power run.
How we do it
We set the gate and operator posts, mount the operator, install safety edges and photo sensors, run power and control wiring, and program travel limits and remotes.
Driveway Gate Installation
Signs you need it
Your property lacks a gate at the driveway entrance, or the existing one is rusted through, sagging, or no longer matches the fence line.
What it costs in Mentone
Driveway gate installation in Mentone generally falls between $1,800 and $5,000, with wider openings and steel construction at the higher end.
How we do it
We measure the opening and slope, dig and set posts in concrete, hang the gate with adjustable hinges, and align the latch and stop posts for clean operation.
What Gate Installation Costs in Mentone
| Item | Typical range in Mentone |
|---|---|
| Manual driveway gate (single swing) | $1,800 – $3,200 |
| Automated driveway gate with operator | $3,500 – $7,500 |
| Sliding gate with track and operator | $4,000 – $6,800 |
Does a gate installation in Mentone include the power run?
Most of our automated gate installations include running power from the house to the gate post. The distance, whether we can trench through dirt or have to cut concrete, and local code requirements all affect the final price, which we quote before work begins.
How long does a gate installation take in Mentone?
A standard single driveway gate typically takes one to two days once materials arrive. Custom gates or long power runs can extend the job, and we schedule a firm start date before any work begins. Call (866) 893-2220 for a written estimate.
Brands We Service in Mentone
We stock common replacement parts for Ghost Controls, DoorKing, Elite, and Mighty Mule operators on our trucks, which cuts turnaround time on most Mentone repairs. See the full list on our brands page. We work on the brand you already have.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mentone, CA
| Service | Typical range in Mentone |
|---|---|
| Gate repair (mechanical) | $85 – $160 per hour |
| Electric gate repair | $95 – $180 per hour |
| Control board replacement | $350 – $900 |
| Gate motor replacement | $600 – $1,400 |
| Operator installation | $1,200 – $2,800 |
| Manual driveway gate installation | $1,800 – $3,200 |
| Automated gate installation | $3,500 – $7,500 |
| Sliding gate installation | $4,000 – $6,800 |
| Track clearing and roller replacement | $120 – $300 |
| Service call and diagnosis | $75 – $120 |
In Mentone, two things push gate installation and repair costs upward more than anything else: heavy dust accumulation that requires extra track and roller work, and long power runs from the house to a gate set far back on a large lot. Every job is quoted and agreed before any work starts, so the number on your estimate is the number you pay.
Neighborhoods We Serve in Mentone
We serve the full 92359 ZIP and the surrounding foothill communities. Most Mentone calls come from older residential streets north of Mentone Boulevard and from the larger lots east toward the Crafton Hills, where long driveways are common. We typically reach Mentone homes within one business day for diagnosis.
- Mentone town center and Mentone Boulevard corridor
- East Mentone and the Crafton Hills foothills
- Lugonia Avenue and the northside neighborhood streets
- Opal Avenue and the rural lots south toward the wash
- Garnet Avenue and surrounding blocks
Service Area – Cities Near Mentone
Estate Gate Repair serves Mentone and the surrounding foothill and valley communities. If you’re in a neighboring city, we cover you there too. We regularly work in Redlands, CA, Yucaipa, CA, Highland, CA, and Calimesa, CA. Call (866) 893-2220 and we’ll confirm coverage for your street.
Serving Mentone, CA — Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mentone
We typically reach Mentone addresses in the 92359 ZIP within one business day for diagnosis. For urgent security issues like a gate stuck open, tell the dispatcher when you call and we’ll prioritize the visit. Call (866) 893-2220 and we’ll give you a straight answer on timing.
Manual gate installation on existing posts rarely requires a permit, but automated gates with electrical runs often do, especially when the power run crosses a driveway or public easement. We handle the permit check as part of the estimate and quote the full price before work starts.
On-site estimates for gate installation in Mentone are free. A service call for diagnosis has a flat fee of $75 to $120, which we credit toward the repair if you approve the work. Every price is agreed in writing before anything is done.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mentone Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Gilbert Vargas"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Paige Walsh"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Marco Mendoza