Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Fontana?
Gate installation in Fontana typically costs between $2,400 and $9,800 for a residential driveway gate with an automatic opener, including materials and labor. A basic single-swing gate with a LiftMaster or Linear operator lands near the low end, while a wide dual-swing estate gate with access control, keypad entry, and video intercom runs toward the top. Manual garden or walkway gates start around $900 and go up from there.
Those numbers move depending on gate width, material, soil conditions in your part of Fontana, and whether we’re adding the electronics from scratch or replacing an existing operator. Call (866) 893-2220 for a free estimate tailored to your property.
Key Takeaways
- Most Fontana driveway gate installs fall between $2,400 and $9,800.
- Automatic operators add $700-$2,600 on top of the gate itself.
- Material choice (steel, aluminum, wood, wrought iron) is the biggest single price lever.
- Permits and HOA approval can add $150-$600 depending on your neighborhood.
- Free estimates are available: call (866) 893-2220.
Gate Installation Cost Breakdown (2026)
Here’s what a full install looks like line by line for the Fontana market this year. These ranges assume a standard residential driveway gate; light commercial and oversized estate gates run higher.
| Line Item | Typical Cost Range |
|---|---|
| Single-swing manual driveway gate (steel or aluminum) | $1,400 – $2,900 |
| Dual-swing driveway gate (two leaves) | $2,800 – $5,600 |
| Sliding driveway gate | $3,200 – $6,400 |
| Ornamental wrought iron upgrade (per linear foot) | $75 – $180 |
| Cedar or redwood wood gate | $2,200 – $4,800 |
| Automatic gate operator (LiftMaster, Linear, Elite, FAAC, BFT) | $700 – $2,600 |
| Dual-operator setup for wide openings | $1,800 – $3,900 |
| Keypad or access control system | $250 – $850 |
| Video intercom | $450 – $1,400 |
| Safety sensors and reversing loop | $180 – $450 |
| Concrete footings and pads | $350 – $1,100 |
| Permit and inspection fees (Fontana) | $150 – $400 |
| Labor (installation and setup) | $500 – $1,800 |
What drives cost up? Material first – wrought iron and cedar cost more than powder-coated steel or aluminum. Second is width: a 16-foot opening needs heavier hardware and often a dual operator. Third is electronics. A basic keypad and two safety sensors add a few hundred dollars; a full access-control system with intercom and remote programming adds well over a thousand. What pulls cost down? A standard-width single gate in steel with a straightforward LiftMaster operator is the most economical full-automatic setup we install in Fontana, and it’s still a solid, long-lasting system.
What Affects Gate Installation Pricing in Fontana
Fontana properties aren’t all the same. Here’s what pushes your price in either direction.
- Lot layout and driveway width. Standard 12- to 14-foot openings are simpler to outfit. If you’ve got a wide RV pad or an oversized horse-property entrance out toward the Etiwanda or Jurupa side of town, expect to pay for wider leaves, heavier hinges, and sometimes a second operator.
- Soil and grading. Fontana soils are often sandy or gravelly near the foothills, which can require deeper footings or extra concrete for posts. That’s usually $100-$400 more than a flat-lot job.
- Material and finish. Steel, aluminum, and wrought iron dominate here. Powder coat holds up well against the inland heat and dry air, so we usually steer customers that way over bare iron that needs painting.
- Automation brand and features. LiftMaster and Linear are the most common operators we install in Fontana; FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule all come up too, depending on gate weight and access-control needs. If you have a preference, we work on the brand you already have or recommend based on your gate.
- HOA and city permitting. Many Fontana neighborhoods – particularly the newer master-planned tracts in the northern part of the city – have HOA design review for gate style, color, and height. Budget time and sometimes a small design-review fee, and pull a city permit for anything over four feet.
- Power availability. If there’s no outlet or conduit near the driveway, adding a line from the house adds $200-$700. Solar operators are an option on some LiftMaster and Ghost Controls systems, but they aren’t right for every gate.
How Much Does It Cost to Automate an Existing Gate?
Adding an automatic opener to a gate you already have typically costs $1,100 to $3,400 in Fontana, depending on gate weight, opening type (swing or slide), and operator brand. That usually includes the operator, safety sensors, keypad, and installation labor.
Swing gates are the most common retrofit we do. Sliding gates sometimes need a track repair or new rack before automation makes sense – we’ll tell you honestly if that’s the case. A basic single-swing LiftMaster setup runs near the low end of that range. A dual-swing setup for a wide entry, or a system with intercom and video access, runs near the top. Call (866) 893-2220 for a free estimate on automating your existing gate.
Manual vs. Automatic Gate Installation Cost
A manual driveway gate installs for roughly $1,400 to $3,400 in Fontana. An automatic driveway gate adds the operator, controls, and safety devices, bringing the total to $2,400 to $9,800 depending on size and features.
Manual gates make sense on short driveways or second entrances that don’t see daily traffic. Automatic gates make sense whenever someone would otherwise have to stop, get out, and open the gate by hand – which is most family homes and any property where the gate is the primary access point. If you’re on the fence, we’re happy to walk through the trade-offs on your property.
How to Save on Gate Installation
Gate installation is not the kind of purchase you want to cheap out on, but a few practical moves can cut the bill without cutting quality.
- Choose one material for the whole fence line. Matching your gate to the fence you already have can reduce labor and hardware cost.
- Stick with standard widths where you can. Custom widths mean custom leaves, hardware, and operators – sometimes 20-30% more.
- Consider a manual gate with an automation add-on later. If the budget is tight, install the gate now and automate in a year or two. We’ll build it so the upgrade is straightforward.
- Bundle gate and operator installation. Doing both at once is cheaper than two separate jobs because the footings, conduit, and hardware are all planned together.
- Ask about solar instead of running power. If your driveway is far from the house, solar automation on certain brands avoids the cost of trenching a power line.
- Get a free estimate first. We’ll come out, measure, and give you a real number rather than a guess. That alone saves surprises. Call (866) 893-2220.
What’s Included in a Gate Installation Quote
Every quote we give in Fontana includes the gate itself, posts and footings, hardware (hinges, latches, rollers), any operator and controls you choose, safety devices, installation labor, and haul-away of packaging and any old gate you’re replacing. Permits and HOA fees are sometimes included and sometimes passed through – we’ll say clearly which, so there are no surprises. Access control, intercom, and video are always itemized separately.
Our full-service scope means you’re dealing with one specialist from initial installation through years of repair work, rather than juggling a fence contractor, a handyman, and an electrician. That continuity is worth knowing before you compare bids. Learn more on our Gate Installation in Fontana page.
Why Choose a Gate-Only Specialist in Fontana
We’re a dedicated Gate Installation services company. Not a general handyman or a garage-door operation that dabbles in gates. Our tools, parts inventory, training, and diagnostics are all built around gates. That means when we show up to install or to diagnose an existing system, we’re not learning on your property.
From the motor to the control board, we handle both the mechanical and the electronic sides of a gate system. We work on the brand you already have across nine major operators – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – and we diagnose first, replacing only what’s needed. Your gate, our specialty: that’s the whole business.
FAQs – Gate Installation Cost
How much does gate installation cost in Fontana in 2026?
Gate installation in Fontana runs $2,400 to $9,800 for a residential driveway gate with automation, or $900 to $3,400 for a manual gate. Wide openings, wrought iron, and full access-control systems push toward the top of the range. Call (866) 893-2220 for an exact quote – estimates are free.
Is it cheaper to repair or replace my gate?
Generally, repair costs 15-30% of the price of a new gate, so replacement only makes sense when the structure is bent, rusted through, or repeatedly failing. We’ll inspect your gate and give you both numbers before recommending one. Call (866) 893-2220 for a free assessment.
How much does it cost to automate an existing gate in Fontana?
Automating an existing gate typically costs $1,100 to $3,400 in Fontana, depending on operator brand, gate weight, and features like keypad and intercom. Call (866) 893-2220 – we’ll quote the exact operator and controls for your gate.
Do I need a permit to install a gate in Fontana?
Permits are typically required for gates over four feet tall or any gate powered by an automatic operator, and the fee runs about $150 to $400. HOA design review may apply in newer tracts. We can walk you through what your property needs – call (866) 893-2220.
How long does gate installation take?
A standard single manual gate installs in 4-6 hours; a full automatic dual-gate setup generally takes one to two days, and custom wrought-iron work longer. Call (866) 893-2220 so we can give you a timeline for your specific property.
Can you come today?
Same-day availability depends on schedule, but we can often get out within a day for an estimate and much sooner than that for a gate that’s failed and left a driveway or entrance open. Call (866) 893-2220 and we’ll tell you honestly when we can be there.
Get a Free Gate Installation Estimate in Fontana
Every gate is different, and Fontana has its own quirks – soil, HOA rules, driveway widths – that change what a fair price actually is. Rather than guessing from a chart, call us and we’ll come measure, look at your power run, and hand you a real number. Honest quotes, gate-only expertise, and we work on the brand you already have. Call (866) 893-2220 for a free estimate, or start at our home page to see what else we do.
Pricing reflects the Fontana market as of 2026. Estate Gate Repair offers free estimates – call (866) 893-2220.
What Our Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— David Nguyen"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Garcia"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Ebony Hampton