Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Fontana Homeowners
A new gate changes how your property functions and how it looks from the street, but only if the installation is done right. We’re Estate Gate Repair, and gates are all we do. Not garage doors, not fencing as a side hustle. Every truck, every diagnostic tool, and every hour of our training is built around gate systems. That focus means we get the details right, from the weight rating on a sliding track to the sensitivity setting on an automatic opener. If you need Gate Installation – Fontana done correctly the first time, call us at (866) 893-2220 for a free, no-obligation estimate. Noel Castañeda leads our team with a simple rule: diagnose first, build it to last.
Automatic Gate Installation
Automatic gate installation means equipping your gate with a motorized operator, access controls, and safety features so it opens and closes without you leaving your vehicle. In Fontana, where many homes sit on larger lots and security is a genuine concern, automatic gates are a practical upgrade, not a luxury. We install and wire the full system: the operator arm or slide motor, the receiver, keypads, intercoms, and the required safety edges and photo eyes. You’ll deal with one specialist from the day we measure to the day you drive through. We work with DoorKing, LiftMaster, and Elite operators, among others, and we’ll match the right unit to your gate’s weight and duty cycle.
Operators Matched to Gate Weight
Most Fontana driveway gates fall between 300 and 900 pounds, and an undersized operator is a warranty void and a breakdown waiting to happen. We calculate the gate’s exact panel weight and cycle frequency before recommending a unit. No guesswork when it comes to the motor that will move your gate for years.
Safety Systems as Standard
Every automatic gate installation we do includes photo eyes and a reversing edge. These are not add-ons. They protect children, pets, and vehicles, and they’re required for the gate to pass final inspection and operate safely.
Styles & brands we work with
Gate Installation Services
Gate installation services cover the full scope of putting in a new gate system: site assessment, post setting, gate assembly and hanging, operator installation, and electrical connection. In Fontana, we regularly install gates on properties where the existing gate was poorly hung by a general contractor or where a new build never got a gate at all. The work we do holds up to the Inland Empire’s heat, wind, and dust. Call (866) 893-2220 for a free measure and written estimate for your property. Most full installations in Fontana run between $2,800 and $7,500 depending on gate size, material, and whether automation is included, which you can read more about in our Gate Installation pricing guide.
Full System, One Crew
We don’t bring in a separate electrician or sub out the concrete work. The same crew that sets your posts also runs the power and programs the remote. That keeps responsibility in one place and means nothing gets lost between trades.
New Build or Gate Replacement
Whether the property is a brand-new construction in Fontana or you’re replacing a rusted-out gate from the 1990s, the process starts the same way: an on-site measure, a conversation about how you use the gate daily, and a written quote. We quote the day we measure, and the price is locked before any work begins.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric gate installation is the wiring side of modern gate systems: running power to the operator, connecting the control board, programming remotes, and setting up keypads or intercoms. Many general contractors in Fontana will hang a gate but won’t touch the electrical side, because low-voltage and line-voltage work around automated gates is a different skill set. That’s our specialty. We’ve wired systems for every major operator brand you’re likely to own, and we troubleshoot circuits, not just hardware. Your electric gate installation includes all electrical connections, operator programming, and safety system calibration. Expect the installation itself to take one to two days depending on how far the power needs to run.
Control Board Programming
The operator’s control board is the brain of your gate, and it has to be configured correctly: open and close limits, auto-close timing, obstruction sensitivity, and remote programming. We’ve programmed hundreds of boards across DoorKing, LiftMaster, Mighty Mule, and other makes. When its done right, a ten-year-old can operate your gate, and a five-year-old can’t open it.
Power Run and Conduit
Running power to a gate is usually the part property owners underestimate. We trench and run conduit to code, protect the wiring from the elements, and leave your property clean when we go. In Fontana, where summer heat hardens the soil and winter rains saturate it, proper conduit depth matters more than most contractors think.
Driveway Gate Installation
Driveway gate installation is the process of setting a gate across your vehicle entrance, including the posts, hinges, gate panel, and any automation. In Fontana, driveway gates serve two purposes: security and curb presence, and both depend on the installation being square, level, and strong. We set posts in concrete at the correct depth for the gate’s weight, hang the gate with bearings or hinges rated for its load, and set the operator so the gate moves smoothly without dragging. Most driveway gate installations in Fontana cost between $2,800 and $6,500, with automation adding $1,200 to $2,800 on average. Call (866) 893-2220 to get a real number for your driveway.
Post Setting That Doesn’t Move
A sagging gate almost always traces back to a post that wasn’t set deep enough or wasn’t filled with concrete properly. We set posts below the Frost line and let the concrete cure completely before the gate is hung. No shortcuts, because a gate that shifts in a year is a gate that costs you twice.
Cantilever vs. Track Systems
For wider driveways in Fontana, a cantilever sliding gate often makes more sense than a swing gate. It doesn’t need a track across the driveway, which means no rail to get clogged with dirt or gravel, and fewer points of failure year over year.
Sliding Gate Installation
Sliding gate installation is the right choice for Fontana properties with limited swing room or graded driveways where a swing gate would drag. A sliding gate runs on rollers along a track or as a cantilever system above the ground, and it requires precise leveling at install. We measure your driveway width, panel weight, and the available space for the gate to slide back, then build the system so it glides instead of grinding. For Gate Installation in Rialto and nearby Fontana, sliding gate installations typically run $3,500 to $8,000 depending on panel size and whether you need an automatic operator. The price is quoted and agreed before we start any work.
Track vs. Cantilever Choice
If your driveway is paved and you don’t want overhead clearance issues, a V-track sliding gate is often the most dependable and economical choice. If you park heavy vehicles or the driveway accumulates gravel and debris, cantilever is the better option, and we’ll explain the difference in plain terms during the estimate.
Guides and Rollers Built to Last
Cheap rollers wear out fast, especially in Fontana’s dusty, dry conditions. We use heavy-duty bearing rollers and guide wheels designed for the gate’s weight. The difference shows up years later, when your gate still slides smooth and quiet.
Gate Opener Installation
Gate opener installation is the motorized operator and control system that automates your gate, including the remote transmitters, keypad, and safety sensors. If you already have a gate that you’re opening by hand, adding an opener transforms how you use your property, especially in Fontana’s summer heat. We install openers from DoorKing, Elite, Mighty Mule, and LiftMaster, and we select the model based on your gate’s weight and how many cycles per day you’ll put on it. A gate opener installation in Fontana generally runs $1,200 to $2,800 including the operator, wiring, programming, and remotes. The exact price depends on operator type and access control options.
Right Opener for the Right Gate
A swing gate needs a different operator than a sliding gate, and a gate that cycles twenty times a day needs a heavier-duty unit than one that cycles four times. We spec the operator to match the gate, not the other way around. That’s why our openers last.
Remotes and Access Setup
We program every remote, keypad, and intercom as part of the installation, and we’ll walk you through using each one before we leave. If you want a phone app or a vehicle sensor, we can add those too. Your gate, our specialty, from the motor to the control board.
Gate Fabrication
Gate fabrication is the custom building of a gate panel and frame to fit your specific opening, style, and security needs. In Fontana and nearby communities like Bloomington, where lot sizes and driveway widths vary widely from one neighborhood to the next, an off-the-shelf gate often doesn’t fit properly. See our Gate Installation in Bloomington for more details. We build gates to your exact measurements and weight requirements, in steel or ornamental iron, and we match the design to your property. Custom fabrication typically runs $1,800 to $6,000 depending on material, size, and design complexity. That price is quoted and agreed before any work begins, so there are no surprises when the invoice arrives.
Built to Measure, Not Adapted
A gate that’s fabricated for your exact opening hangs better, seals tighter, and lasts longer than a stock panel that’s been cut down to approximate your space. We measure every dimension and build the gate for that specific site. No adapter plates, no awkward filler, no compromises.
Design That Matches the Property
Whether you want a simple steel tube frame or an ornamental iron design with finials and scrollwork, we’ll match the style of your home and fence. The fabrication shop can build privacy panels, picket styles, or security-focused designs, and we’ll show you samples before any metal is cut.
Brands We Service
We’re certified and experienced across nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That breadth matters because gate openers from different manufacturers don’t just look different, they operate on different logic. A technician who only knows one brand will often misdiagnose a problem with another.
With DoorKing units, we know their slide and swing operator line inside and out, from the 9150 series to older 1601 boards. On LiftMaster equipment, we’re familiar with the LA500, SL3000, and the MyQ ecosystem. Elite and Mighty Mule openers show up constantly in Fontana’s residential gates, and we stock the common parts for both. If you’ve got a brand we haven’t named, bring it up. We work on the brand you already have, and we diagnose first, replace only what’s needed.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate scrapes the ground or drags when opening. This usually means the hinges or post have shifted, or the gate was hung wrong to begin with. Left alone, the scraping gets worse, and the operator works harder every cycle until it burns out.
- The motor runs but the gate doesn’t move. This points to a broken drive gear, a sheared key, or a chain that’s come off the sprocket. Running the motor in this state can destroy it, and the repair bill climbs fast.
- The remote works only when you’re inches away. A weak signal can mean a failing receiver board or antenna issue. It’s also a security concern if the gate sometimes opens when it shouldn’t.
- You hear grinding, popping, or metal-on-metal noise. That sound is metal wearing against metal somewhere in the mechanism. Bearings, rollers, or hinges are failing, and the longer it runs, the more parts get damaged.
- The gate reverses for no reason or won’t stay closed. Intermittent reversing is often a failing safety sensor or a misaligned photo eye. Beyond the annoyance, it’s a safety issue that needs immediate attention.
Our Process, Step by Step
- 1
Free on-site measure and consultation. We come to your Fontana property, measure your opening, assess the existing posts or driveway conditions, and talk through how you use the gate. You get a written quote before we leave, and that number is what you pay.
- 2
System design and equipment selection. We choose the right gate panel, operator, and access controls based on weight, cycle count, and your security needs. We specify parts from brands we know we can support long-term.
- 3
Site preparation and installation. Our crew sets posts, runs power, fabricates or assembles the gate, and mounts the operator. We work clean and keep your property accessible throughout the job.
- 4
Programming, safety calibration, and testing. We program all remotes and keypads, set the open and close limits, calibrate the safety edges, and run the gate through a full test cycle, including obstruction detection and auto-close timing.
- 5
Walkthrough and handoff. We show you how everything works, answer your questions, and leave you with the documentation you need. If anything ever comes up later, you call the same team that installed it.
How Much Does Gate Installation Cost in Fontana?
A typical driveway gate installation in Fontana runs $2,800 to $6,500 for the gate, posts, and labor. Adding an automatic opener brings the total to $4,000 to $9,000 depending on operator type and access control. A full custom gate with fabrication and automation can reach $10,000 or more on larger properties. The biggest factors are gate size, material (steel tube, ornamental iron, or aluminum), operator brand and duty rating, and how far we need to run power.
You won’t get hammered with change orders from us. The price we quote after the on-site measure is the price you pay. If something changes during the job, we tell you before it affects the invoice. A free estimate from us includes the measurement, the recommended equipment, and a line-item price, so you can compare with confidence. Call (866) 893-2220 to schedule yours.
Our Service Area Near Fontana
We install gates all over Fontana and the surrounding Inland Empire. That includes Gate Installation in Bloomington, Gate Installation in Rialto, plus Sunnyslope, Glen Avon, Muscoy, Rubidoux, Colton, Highgrove, Grand Terrace, Jurupa Valley, and San Bernardino. If you’re within 20 miles of Fontana, we can usually schedule your measure within a few days. If you’re not sure whether we cover your area, call us and ask.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Fontana
Gate installation is the process of setting a new gate across a driveway or entry point, including the posts, the gate panel, and any automation you choose. It covers everything from measuring and fabrication to hanging, wiring, and programming. In Fontana, most installations include either a swing or sliding gate, and many also include an automatic opener for convenience and security.
Most residential gate installations in Fontana take one to two days. Custom fabricated gates add a few days for the fabrication work before installation day. We’ll give you a specific timeline when we measure your property, and we stick to it.
A basic driveway gate installation in Fontana starts around $2,800, and a full automatic sliding gate with custom fabrication can reach $8,000 or more. The exact price depends on gate size, material, operator type, and power requirements. Every project gets a free on-site estimate with a locked price before work starts. Call (866) 893-2220 for your quote.
Yes, we service and install DoorKing and LiftMaster operators, along with FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. We’re not tied to one brand, so we recommend the right operator for your gate, not the one we happen to sell. If you already have a brand you like, we can work with it.
Installations are scheduled, so we don’t offer same-day installation. But if your existing gate has failed and you need it functional or secured, we can often get a technician out quickly to stabilize the situation. Call (866) 893-2220 and we’ll tell you how soon we can be there.
We stand behind our workmanship and the equipment we install. The specific warranty varies by product and manufacturer, and we’ll cover exactly what’s included in your written quote. If something goes wrong with our installation, we make it right.
Clear the area around your driveway or entry point, move any vehicles out of the way, and make sure we have access to your electrical panel if we’re running power. We’ll tell you exactly what to do during the estimate. Beyond that, just be there to approve the final placement before we set the posts.
Schedule Your Gate Installation Service in Fontana Today
Your new gate starts with a free on-site measure and a straight answer on price. We’re gate-only specialists serving Fontana and the surrounding Inland Empire, and we’d rather show you our work than tell you about it. Call (866) 893-2220 today to schedule your free estimate, no obligation. Your gate, our specialty.
Written by Noel Castañeda, Owner at Estate Gate Repair, serving Fontana and the surrounding Inland Empire.