Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across San Bernardino
Gate repair in San Bernardino usually comes down to one question: can you fix the gate we already have, or are we replacing the whole system? In most cases, we repair it. Estate Gate Repair is a Gate Repair specialist serving San Bernardino, and we work on the brand you already own. Whether your swing gate drags after a Santa Ana wind event or your slide gate motor stopped responding on a 100-degree afternoon, we diagnose first and replace only what’s needed. Call (866) 893-2220 for a free estimate, and we’ll send a gate-only technician to your San Bernardino property. We don’t split our attention across other trades. Gates are all we do.
Why Estate Gate Repair Is San Bernardino’s Preferred Gate Repair Company
San Bernardino homeowners call us because most gate companies treat gates as a side job. We don’t. Our entire operation – tools, parts inventory, training, diagnostics – is built around driveway and estate gates, so when a DoorKing board fails or a Mighty Mule arm bends, we already know the failure mode before we arrive. In the walled-in neighborhoods around Del Rosa, Shandin Hills, and the older tract streets near 92404, we see the same pattern repeatedly: gates hung on 1940s-1970s block walls that shift over time, stressed further by wind funneling through the Cajon Pass. That local repetition means faster diagnosis for you.
Customers across San Bernardino’s north and west sides tell us the same thing: they struggled to find anyone who understood their gate’s automation system, not just the metalwork. That’s the gap we fill. Diagnostic work is brand-agnostic, so you won’t get steered toward replacing a perfectly good operator just because we prefer a different manufacturer. We work on the brand you already have.
Styles & brands we work with
Gate Welding in San Bernardino
Gate welding in San Bernardino is repair work that addresses structural failures rather than cosmetic damage. We perform on-site welding for cracked gate frames, broken hinge mounts, rusted-through rails, and bent cantilever arms. Given the wind load this city experiences, welded joints are often the only permanent fix.
When Welding Is the Right Repair
If your gate’s steel frame has cracked at a corner joint or the hinge plate has torn away from the post, tightening bolts won’t hold. The metal needs to be ground clean, re-aligned, and welded. After a 60-70 mph gust cycle pushes a swing gate past its limit, we typically find fatigue cracks at the top hinge or the mid-rail. These failures are repairable on site in most cases.
What Local Welding Repairs Cost
For San Bernardino homeowners, a straightforward crack weld or hinge remount typically runs $180-$350. A bent cantilever arm repair on a slide gate adds roughly $150-$300 depending on access and whether we need to remove the arm for straightening. If rust has compromised multiple points, expect a full structural reinforcement to run $400-$800. We quote before we weld. You’ll know the price before any work starts.
Commercial Gate Repair in San Bernardino
Commercial gate repair in San Bernardino covers apartment complex entry gates, industrial yard gates, church and school perimeter gates, and retail loading-area gates. These systems see more cycles per day than residential gates and often run on older automation hardware. When a commercial gate fails, every minute it sits stuck open or closed is a security problem for your tenants or inventory.
Automation Failures on Commercial Properties
Most commercial calls involve an operator that stopped responding. We see obsolete control boards, burned contactors, failed loop detectors, and power supply issues. Equipment from the 1990s and early 2000s often can’t accept a modern board, so we’ll give you an honest assessment: retrofit if compatible, replace the operator head if not. Our technicians are experienced across DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule, so we’re not limited to one product line.
Commercial Gate Repair Cost Ranges
Diagnostic service calls for commercial gate repair in San Bernardino generally start around $150-$200, with board replacement or loop detector work adding $250-$600 depending on brand and hardware availability. A full operator replacement on a commercial slide gate ranges from $1,800 to $4,500 installed, influenced by gate length, voltage requirements, and whether safety edges and photo eyes need upgrading to current UL 325 standards. We’ll provide a written quote before we touch the gate.
Trusted Brands We Service in San Bernardino
We arrive prepared for the operator you actually have, not the one we’d prefer to sell you. San Bernardino homes and commercial properties commonly run DoorKing, Elite, Mighty Mule, and LiftMaster systems, plus legacy FAAC, BFT, Linear, Viking, and Ghost Controls units that other companies won’t touch. Parts availability matters here: we keep common boards, remotes, photo sensors, and hinge hardware stocked, so repair timelines stay short. Your gate, our specialty – across all nine major automation brands.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in San Bernardino Homes
- Santa Ana wind damage: Gusts rushing through the Cajon Pass bend cantilever arms and pull swing gates out of plumb, especially on corner lots and north-side streets with long uninterrupted wind runs.
- Hinges torn from aged block pilasters: On 1940s-1970s cinderblock walls, the anchor bolts pull loose from the block itself, not the hinge. The repair means resetting the pilaster or installing through-bolts, not just swapping hinges.
- Obsolete control boards: Older DoorKing and LiftMaster operators with discontinued boards fail during power surges or after years of wind-load strain. Retrofitting a modern board is sometimes possible; sometimes the whole operator head must go.
- Footing erosion from winter runoff: San Bernardino’s flash-flood runoff undermines post footings on sloped driveways, causing gates to sag and drag. Re-setting posts in properly compacted concrete prevents the problem from returning.
Pricing for Gate Repair in San Bernardino, CA
Most residential gate repairs in San Bernardino run between $180 and $650, with diagnosis included in the service call fee. Hinge and post repairs typically land at $180-$350, hinge post replacement on block walls at $350-$700, and new operator installation from $1,200 to $3,500 depending on brand and gate type. The wet winters and regular wind events mean we often combine repairs: realignment plus hinge reinforcement plus a safety sensor is common. Every job gets a fixed written quote before work starts. Estimates are free – call (866) 893-2220.
We Also Serve Cities Near San Bernardino
Estate Gate Repair serves San Bernardino and surrounding communities including Muscoy, Highland, Loma Linda, and Rialto. If your business or home is in one of these areas, the same gate-only specialists arrive with the same stocked van and the same brand-agnostic approach.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Bernardino
Sometimes adjustment is enough, but often the real problem is that the hinge post shifted or the block pilaster it’s mounted to has settled. We’ll measure the gate’s plumb and check the post footing first, because a gate that drags after a wind event usually has a structural issue, not just loose hardware. Call (866) 893-2220 for a diagnosis – if hinge adjustment is genuinely all it needs, that’s all you’ll pay for.
That depends on the model and board availability. Many 1990s operators have discontinued control boards, and no compatible aftermarket board exists. We’ll check the specific model before recommending anything. In San Bernardino, where power surges and wind stress shorten operator life, replacing the entire operator head with a current model often costs less long-term than chasing obsolete parts.
Yes, and this is one of the most common jobs we do in San Bernardino. On the walled-in properties across the north and west sides, the gate post is often anchored into the same cinderblock perimeter wall that fences the yard. When wind or time shifts that block pier, the gate sags. We re-set the pilaster, re-anchor the hinge post, and realign the gate. The repair addresses the block, not just the hinges.
Yes. Under UL 325, automatic gate operators installed or significantly modified after 2001 require safety devices like photo eyes, safety edges, or both, depending on the gate type. If your older system lacks them, upgrading is the right call. During any operator replacement or major board repair in San Bernardino, we bring the safety system up to current standard.
We can, as long as the rust hasn’t structurally compromised the frame to the point where welding would just blow through. We’ll grind back the rusted sections and evaluate what metal remains before recommending any weld work. If the frame is too far gone, we’ll show you why and give you a replacement quote that’s priced honestly. Call (866) 893-2220 to have us look.
Written by Noel Castañeda, Owner at Estate Gate Repair, serving San Bernardino and surrounding communities with gate-only repair and installation expertise.