Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pomona
If you’re dealing with a gate that won’t open, sags on its hinges, or drags across the driveway in Pomona, we can typically diagnose the problem and get it working again without replacing the whole system. Most gate repairs in Pomona run $150 – $450 depending on the failure, and we quote the price before any work begins. We know the older gates in neighborhoods like Lincoln Park, Wilton Heights, and Phillips Ranch, and we carry parts for the brands most common across 91766, 91767, and 91769. Call (866) 893-2220 to schedule a repair.
Why Estate Gate Repair Is Pomona’s Preferred Gate Repair Company
We’re a gate-only company. That’s not a tagline, it’s our entire operation. Our parts inventory, our diagnostic equipment, our training, and our trucks are all built around one trade – gates. When a Pomona homeowner calls us about a sagging wrought-iron gate on a 1940s bungalow or a slide gate that’s jammed on a shared driveway off Garey Avenue, we’re not learning on the job. We’ve seen that exact failure dozens of times.
Led by Noel Castañeda, our team works on the brand you already have. We don’t push a replacement operator just because it’s easier to sell. We diagnose first, replace only what’s needed. That’s the whole point of calling a specialist instead of a general contractor who handles gates as a side line. From the motor to the control board, we cover the full electrical and mechanical range.
Pomona customers call us because gates here are old. They were installed decades ago, and they need someone who understands how they fail. We give you a straight answer on whether a hinge repair, post reset, or operator tune-up will solve it – and what it costs before we touch anything.
Styles & brands we work with
Wrought Iron Gate Repair in Pomona
Wrought Iron Gate Repair in Pomona is, more often than not, a job of re-hanging and re-squaring an old gate rather than replacing it. The city’s bungalows from the 1920s through the 1950s still have their original iron driveway and side-yard gates in many neighborhoods. Those gates sag at the hinge side, rust at the welds, and drag on the concrete apron. That’s the everyday reality of the work here.
A typical wrought-iron gate repair in Pomona runs $180 – $400. That includes straightening the frame, re-welding cracked joints, replacing worn hinge pins, and re-aligning the latch so the gate actually closes square. On a gate that has pulled away from its brick or stucco pillar, we re-anchor the hinge posts and correct the throw of the gate. On gates with rusted-through bottom rails, we cut out and weld in fresh steel rather than condemning the entire panel.
Hinge and post restoration
The failure point on Pomona iron gates is almost always the hinge post. Decades of dry heat followed by Santa Ana wind cycles has worked the anchors loose. We re-set the post in fresh concrete, correct the pitch, and hang the gate so it swings clean without scraping.
Latch and lock repair
Wrought-iron gates from this era often have surface-mounted latch bars that no longer line up with the strike plate. We align or rebuild the latch assembly, and repair the lock box if it’s rusted or jammed.
Metal Gate Repair in Pomona
Metal Gate Repair in Pomona covers the spectrum from chain-link slide gates to steel frame driveway gates and post-mounted security gates. Much of the work involves gates on tight rights of way where a full swing gate never had room to operate. These gates slide, and when the track fills with debris or the roller truck wears down, the panel grinds and binds.
A metal gate repair in Pomona runs $150 – $450 on average. The range breaks down by job: replacing a bent or seized roller truck costs less than cutting and re-welding a rusted steel frame. Gate realignment on an old chain-link slide gate, including resetting the track brackets, falls in the middle. We always quote the exact number after diagnosis, before work starts.
Slide gate track and roller repair
Slide gates are common on Pomona shared driveways and older apartment buildings where a swing gate would block the walkway or the street. We repair the rack, replace the roller trucks, and adjust the operator’s stop points so the gate opens and closes without slamming.
Frame straightening and weld repairs
Steel frames distort over time, especially when post footings shift in clay soil. We angle-grind the rust, straighten the frame with clamps and heat, and re-weld cracked corners and hinge plates so the gate hangs true.
Trusted Brands We Service in Pomona
We service DoorKing, Elite, Mighty Mule, and LiftMaster operators, among others, and we carry local parts stock for the boards, remotes, photo eyes, and limit switches these systems use. Pomona customers don’t have to wait for a distributor to ship a part from across the country. We service the operator you have and we don’t push a brand swap. The gate opener doesn’t need to be replaced just because the control board failed. We repair what’s repairable and tell you plainly when it’s not.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Pomona Homes
- Sagging gates dragging on the driveway apron. Wrought-iron and chain-link gates installed in the 1940s and 1950s have worn hinge pins and stretched hinge barrels. The bottom corner scrapes the concrete, and every open-and-close cycle makes it worse.
- Hinge posts shifting in clay-heavy soil. Pomona’s dry summers shrink the clay around post footings, and the post leans. A gate that latched perfectly last spring doesn’t line up by fall. We re-set the post and re-square the gate.
- Rusted welds at hinge and latch points. Decades of high heat and Santa Ana wind stress crack welded joints. We grind out the rust, weld in new material, and repaint the repair so it doesn’t fail again next season.
- Slide gates binding on narrow shared driveways. When there’s no room to swing a gate, older Pomona properties use slide gates. The track warps or the roller trucks wear out, and the gate jams halfway. We rebuild the track and replace the rollers.
Pricing for Gate Repair in Pomona, CA
Here are the real numbers for Pomona. Hinge and post repairs run $150 – $250 when the hinge side is intact and only the hinge barrel or pin needs work. Weld and rust repairs on wrought-iron or steel gates run $180 – $400, depending on how much of the frame has rusted through. Gate realignment, including re-squaring a gate that drags and re-setting the latch, runs $180 – $300. Full slide gate track and roller replacement runs $250 – $450. Electric gate operator repair, including control board diagnostics, runs $200 – $450. Every quote is confirmed in writing before work starts. Call (866) 893-2220 for a free estimate.
If your gate is hanging from its old hinge posts in 91766 or 91767, it’s probably repairable. That clay-heavy soil that’s common around Pomona shifts post footings through the dry season, and that’s the root cause behind most of the misalignment we correct. On a shared driveway off a downtown Pomona side street, our crew answered a call about a chain-link slide gate dragging on the concrete apron after a windy, dry spell. The hinge post footing had settled in the clay soil, throwing the panel out of square and stripping the latch. We re-set the post, corrected the sag, and tuned the LiftMaster gate operator so the slide gate and its safety photocell worked cleanly again. We kept the pedestrian side open the whole day so tenants could still walk out to the street. That’s the access issue on a multi-unit property: you can’t just shut the gate and block everyone. We plan the work so the walk-through stays open.
Much of Pomona’s housing was built between the 1920s and 1960s, and many properties retain original wrought-iron or chain-link gates whose hinges, latch posts, and welds have weathered decades of dry heat and winter Santa Ana winds. The work here is repair and re-hang of aging gates, not new installation. The city’s mix of older single-family homes and multi-unit rental properties also means gate repair often involves aligning and reinforcing gates that no longer square with their original posts. That’s what we do. Your gate, our specialty.
We Also Serve Cities Near Pomona
Our Gate Repair team regularly works in Pomona’s surrounding communities as well. If you’re in La Verne, Claremont, Montclair, or Los Serranos, we’re nearby and familiar with the same aging gate stock and soil conditions. The full breakdown of what we cover is on our Gate Repair in Pomona page, and if you’re on the edge of town, call us and we’ll confirm coverage.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pomona
Yes, in most cases. Wrought-iron gates on older Pomona properties drag because the hinge pins are worn, the hinge post has settled, or a weld has cracked at the hinge plate. We re-hang the gate, re-set the post if needed, and re-weld the cracked joint. The gate stays. The fix usually costs $180 – $400. Call (866) 893-2220 and we’ll tell you after seeing it.
Yes. We’ve done it on shared driveways off Pomona side streets where the walkway and the driveway share the same narrow access. We install a rack-and-pinion slide gate, set the track, and wire the operator with safety photocells so the gate doesn’t close on a pedestrian. You get the security of a gate without blocking the path.
Pomona’s clay-heavy soil swells and shrinks through the dry season, and that movement shifts the post footings. A gate that latched perfectly in spring doesn’t line up by late summer because the post has leaned a few degrees. We correct it by re-setting the post in fresh concrete and re-squaring the gate, not by forcing the gate back into alignment.
Yes. We service all of those brands and more. The control boards, limit switches, photo eyes, and motors are all part of our standard repair coverage. We don’t ask you to replace a working operator just because we’re more familiar with another brand. We fix what you have. A typical operator repair in Pomona runs $200 – $450.
We keep the pedestrian access open while we work on the gate panel or the operator. On a slide gate job on a downtown Pomona shared driveway, we left the walk-through side open the whole day so tenants could still get to the street. We plan the work around the access, not the other way around.
If your gate is dragging, jammed, or won’t respond to the remote, call (866) 893-2220 for a free estimate. We’ll diagnose it in Pomona and give you the number before we start.
Written by Noel Castañeda, Owner at Estate Gate Repair, serving Pomona and the surrounding communities with gate-only repair and installation.