Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Irvine
A gate that won’t open is a problem you need solved today, not scheduled sometime next week. We repair driveway gates, courtyard gates, HOA perimeter gates, and pool gates across Irvine, from the older villages around Woodbridge and Turtle Rock to the newer complexes near the Spectrum and UCI. Most repairs in Irvine run between $180 and $650 depending on whether we’re fixing a hinge, replacing an operator board, or welding a cracked steel frame. If you’re dealing with a gate that won’t budge, a motor that hums and stalls, or an HOA notice taped to your side gate, call (866) 893-2220 and we’ll get a specialist out.
Why Estate Gate Repair Is Irvine’s Preferred Gate Repair Company
We’re a gate-only shop. That’s not a marketing line, it’s the core of how we work. Every diagnostic tool, every spare part on our trucks, and every hour of our training is built around gates, so when we show up in Irvine we’re not learning your system on the fly. If your gate runs on DoorKing, Elite, LiftMaster, or Mighty Mule, we already know the operator, the board revision history, and what fails first on that model after years of inland sun and clay-soil settling.
Our Gate Repair team has worked on hundreds of gates across Irvine’s master-planned villages. Homeowners and property managers call us because we diagnose before we replace. A sagging gate in Northwood often doesn’t need new hinges at all, it needs the post footing reset. A pool gate in Westpark that trips its safety sensor usually has a wiring fault we can isolate in one visit. That’s the difference between a specialist and a handyman who also does gates.
Led by Noel Castañeda, our technicians arrive with parts for the brands Irvine actually uses. We carry stainless hardware, board-level components for LiftMaster and FAAC operators, and weld equipment for steel and wrought iron repair. When an HOA sends a 30-day correction notice for a gate condition, we understand the urgency and we work to get it resolved before fines start.
Styles & brands we work with
Driveway Gate Repair in Irvine
Driveway gate repair in Irvine usually means one of three things: an electric operator that stopped responding, a steel or iron gate that’s sagging or scraping, or an HOA-flagged condition on a community entry gate. Most driveway gate jobs here run $220 to $700, with operator board replacement on the higher end and hinge or wheel adjustment on the lower. We quote the full price before any work starts.
Electric Operator Diagnosis
When a driveway gate won’t open from the remote or keypad, the failure is usually in the control board, the limit switch, or a cracked solder joint that finally gave out. We test each circuit rather than swapping parts blindly. On liftmaster and FAAC units common in Irvine’s older gated communities, we keep replacement boards and safety photocells stocked so repair doesn’t turn into a two-week wait.
Steel and Iron Driveway Gates
Irvine’s inland sun and dry air do two things to metal driveway gates: they bake off finishes and they accelerate rust where powder coating has been scratched. We repair welded frames, straighten bent pickets, and re-hang gates that have begun to drag on their carriage wheels. If the post has shifted in clay soil, we reset it rather than adjusting the gate to match a leaning post.
Gate Welding in Irvine
Gate welding in Irvine is repair work on steel, iron, and occasionally aluminum frames that have cracked, rusted through, or been hit by a vehicle. A typical weld repair runs $150 to $450 depending on the extent of the crack and whether we need to fabricate reinforcement. Every weld gets ground, primed, and painted to match, because an unpainted weld in Irvine’s climate starts rusting within months.
Cracked Frames and Broken Pickets
When an iron gate cracks, the usual cause is repeated stress at the hinge side or a weak point in the original fabrication. We cut out the failed section, weld in new material, and add a gusset where the design allows. Gates in Irvine’s older villages often have decorative scrollwork that makes simple replacements impractical, so we repair the existing metal rather than pushing a new gate.
Hinge and Post Welding
Hinges fail two ways: the hinge itself wears out, or the weld attaching it to the post cracks. We repair both. When we re-weld a hinge to a square steel post, we also check the post’s footing, because a weld will not hold if the post is moving with seasonal clay shifts. For gates on brick or stucco columns, we use epoxy-set threaded anchors instead of welds where appropriate.
Trusted Brands We Service in Irvine
We work on the brand you already have. DoorKing operators show up constantly on Irvine’s HOA entry gates, Elite and LiftMaster repair in Irvine on residential driveways, and Mighty Mule on lighter swing gates and farm-style estate entries. We don’t steer you toward a replacement just because it’s easier for us. Our trucks carry common boards, remotes, limit switches, and safety sensors for these brands, so a diagnosis in Irvine doesn’t turn into a multi-week parts delay. From the motor to the control board, we fix what’s there.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Irvine Homes
- Clay-soil post shift in Woodbridge and Turtle Rock. The original redwood and cedar courtyard gates from the 1970s and 80s are held by hinges screwed into posts that have been moving for decades as Irvine’s clay soil shrinks and swells with moisture. Replacing the hinge alone never fixes it, the post footing itself has to be reset.
- HOA architectural standard conflicts. Villages like Woodbridge and Turtle Rock have design rules about gate material, color, and even hardware finish. A repair that uses the wrong stain or a modern steel hinge where an oil-rubbed bronze was required can get flagged, even when the gate works fine.
- Safety sensor failures on aging operator boards. Pool gates and community perimeter gates from the 1990s and early 2000s, especially those running old FAAC or LiftMaster operators, start tripping or refusing to close when photocells wear out and boards drift out of spec. Irvine HOAs require these to pass safety checks, so the repairs tend to be urgent.
- Sun-faded and corroded finishes on south-facing gates. A gate that faces the inland sun all day loses its paint or stain faster than one in shade. Add moisture from irrigation systems along side yards, and you get surface rust on wrought iron and fiber rot on wood, both common in Irvine’s zero-lot-line homes.
Pricing for Gate Repair in Irvine, CA
Here’s what you can expect to pay for common gate repairs in Irvine. Hinge replacement on a wood or iron pedestrian gate: $180 to $320. Post footing reset with epoxy and stainless hardware: $350 to $600. Operator board replacement on DoorKing, FAAC, or LiftMaster systems: $280 to $750 depending on the board. Weld repair on a cracked steel or iron frame: $150 to $450. Full driveway gate realignment: $250 to $500.
What moves the price: whether we’re repairing or replacing a component, the condition of the post or footing, HOA materials requirements for the village, and how old the operator is. We quote the total before any work starts, and estimates in Irvine are free. Call (866) 893-2220 and we’ll tell you what the repair will cost.
We Also Serve Cities Near Irvine
Our Gate Repair in Irvine coverage extends to the surrounding communities: Tustin, Aliso Viejo, Santa Ana, and North Tustin. If your property sits in one of these neighboring cities and you need a gate specialist who understands HOA standards and older automation brands, call us at (866) 893-2220.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irvine
No, and in most Irvine villages that would be the wrong repair. Sagging on original 1970s and 80s courtyard gates in Woodbridge, Turtle Rock, and Northwood is almost always caused by the post shifting in clay soil, not by a hinge wearing out. Replacing the hinge treats the symptom. The post footing needs to be reset and the gate re-hung to sit square. Hinge replacement on an otherwise solid gate runs $180 to $320. A footing reset runs $350 to $600. Call (866) 893-2220 and we’ll tell you which one your gate actually needs.
In Irvine, an automatic gate has to meet the same California safety standards as anywhere else: monitored safety edges, working photocells, and a reverse mechanism that stops and reopens if the gate hits an obstruction. HOAs are responsible for their community gates, and many have specific inspection requirements. If your operator is old, a failed photocell or worn safety edge is the most common failure, and we replace both as a pair on most systems. A safety component replacement typically runs $200 to $450 per gate.
Because the post is moving. Woodbridge homes were built on expansive clay soil that shrinks in dry years and swells in wet ones. The original redwood gate posts move with that soil, and over 30 or 40 years the wood around each hinge compresses, cracks, and lets the threads strip out. Tightening or replacing the screws will hold for a few months and then fail again. The permanent repair is resetting the post footing and installing stainless steel lag screws with epoxy, which is what we did recently on a sagging redwood courtyard gate in Turtle Rock where an original 1980s hinge had pulled completely loose. We matched the village’s approved stain after the repair. That job runs $350 to $600 depending on the post.
Yes. We service both brands regularly, along with DoorKing, Elite, Linear, BFT, Viking, Ghost Controls, and Mighty Mule. LiftMaster units are common on residential driveway gates across Irvine, and FAAC operators show up frequently on HOA entry and pool gates built in the 1980s and 90s. Board replacement, limit switch adjustment, remote programming, and safety sensor work are all in our normal scope. Board replacement on these systems runs $280 to $750 depending on the model. Call (866) 893-2220 for a diagnosis.
Yes, and this is standard practice for our work in Irvine. Each village has its own design rules: Woodbridge has approved stain colors for redwood and cedar gates, Turtle Rock has specific hardware finish requirements, and Northwood has rules about gate style and height. We match the material, color, and hardware finish to the village’s published standards, and we can note the compliance in our repair description if your HOA needs documentation. The repair cost may shift slightly for specialty stains or hardware, but avoiding a violation notice is almost always cheaper than redoing the work.
If your gate is sagging, stuck, or flagged by the HOA, call (866) 893-2220. We’ll diagnose it correctly the first time, quote the repair before we start, and match your village’s standards. That’s the whole job.
Written by Noel Castañeda, Owner at Estate Gate Repair, serving Irvine and surrounding Orange County cities.