Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Fontana?
Most gate repairs in Fontana cost between $150 and $650, with the average residential repair landing around $300 to $400. Simple fixes like a misaligned latch or a worn roller run $150 to $250, while electric gate operator problems – failed motors, dead control boards, bad sensors – push toward $400 to $900. New operator installation, if the system is beyond repair, runs $1,200 to $3,500 depending on the gate’s weight and the automation brand.
These numbers reflect what we actually quote across Fontana, not national averages pulled from a database. If you want an exact figure for your gate, call (866) 893-2220 and we’ll give you a free estimate.
Gate Repair Cost Breakdown (2026)
Here’s how the line items break down for the Fontana market this year. Ranges assume a standard residential driveway gate; heavier estate gates and light commercial swing gates will run higher.
| Repair Type | Typical Cost Range | Notes |
|---|---|---|
| Hinge, latch, or roller repair | $150 – $250 | Manual swing and slide gates; common after dry-season expansion |
| Gate alignment / sagging adjustment | $175 – $350 | Often tied to footing or post settling |
| Track or guide rail repair | $200 – $450 | Slide gates; debris and heat warping drive this |
| Electric gate motor repair | $350 – $750 | Depends on brand and whether the motor is rebuildable |
| Control board replacement | $300 – $700 | Board cost varies widely by brand (LiftMaster, FAAC, DoorKing, etc.) |
| Safety sensor / photo-eye replacement | $150 – $350 | Required for code-compliant automation |
| Keypad / access control repair | $150 – $400 | Entry keypads, intercoms, vehicle loops |
| Battery backup replacement | $180 – $350 | Common on older LiftMaster and Mighty Mule operators |
| Full electric operator replacement (installed) | $1,200 – $3,500 | Includes new operator, wiring, and safety devices |
| Full gate installation (new) | $2,500 – $8,000+ | Depends on width, material, and automation |
What pushes a Fontana repair toward the high end of these ranges? Age of the operator, brand availability of parts, and whether the gate is a heavy ornamental iron swing gate versus a lighter aluminum slide gate. A 20-year-old FAAC operator with a discontinued board can cost more to repair than a newer LiftMaster unit simply because the part takes longer to source. We diagnose first and replace only what’s needed, so you’re not paying for a full operator when a $60 sensor is the actual failure.
What Affects Gate Repair Pricing in Fontana
- Gate type and weight. A 300-pound ornamental iron swing gate puts more stress on hinges and operators than a 90-pound aluminum slide gate, and the repair labor reflects that. Estate gates often need two technicians on site.
- Automation brand and parts availability. LiftMaster and Linear parts are widely stocked locally. FAAC, BFT, and DoorKing components sometimes need to be ordered, which adds days and sometimes cost. We service all nine of the major brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so we can identify what you have and source accordingly.
- Whether it’s mechanical or electrical. A broken hinge is a $200 job. A failed control board on an automated gate is a $400 to $700 job because the electronics are more complex and the diagnostic time is longer. Electric gate repair is the most technically demanding category, and it’s where a gate specialist matters most.
- Fontana’s climate and soil. The Inland Empire’s dry summers and Santa Ana wind events are hard on outdoor gate hardware. Swing gate posts settle in the clay-heavy soil common in areas like Southridge and Hunter’s Ridge, which throws gates out of alignment. We see this most often in late summer when soils contract after the spring growing season.
- Access and site conditions. A gate set back 100 feet from the street with mature landscaping around the operator takes longer to service than one at the curb. If we can’t get a truck close, that’s reflected in the labor estimate.
- Permit requirements. New electric gate installations and major structural changes may require a City of Fontana permit. Repairs to existing operators generally don’t, but we’ll tell you upfront if your project crosses that line.
How to Save on Gate Repair
The single biggest way to save is to catch the problem before it cascades. A gate that’s dragging or hesitating is telling you something, and if you wait until the motor burns out, a $250 adjustment becomes a $700 motor replacement. Inspect hinges and tracks seasonally, keep the track clear of debris after wind events, and don’t override safety sensors to force a gate closed. That override is one of the most common reasons we see control boards fail.
Other ways to keep costs down:
- Get a diagnosis before committing to replacement. Many general handyman and garage-door companies default to “replace the operator” because they don’t have the training to repair the electronics. We’ll check the board, motor, and sensors individually and tell you which parts are actually failing.
- Don’t switch to a cheaper operator that doesn’t match your gate. An undersized operator on a heavy gate works harder and fails faster, so you pay twice.
- Bundle repairs. If your safety sensors are also going out while we’re already on site, fixing both in one visit saves the trip charge.
- Ask about free estimates. We offer free estimates across Fontana – call (866) 893-2220 for a no-pressure quote.
If you’d like to understand the full scope of what we handle before you call, our home page lays out every service, and Gate Repair in Fontana covers the local repair process end to end.
FAQs – Gate Repair Cost
How much does it cost to repair an electric gate in Fontana?
Electric gate repair in Fontana typically runs $350 to $900, depending on whether the fault is mechanical (motor, gear, chain) or electronic (control board, sensor, keypad). Motor repairs tend to sit near the lower end; board replacements near the top. Call (866) 893-2220 for an exact quote – estimates are free.
Is it cheaper to repair or replace my gate operator?
Repair is almost always cheaper when the operator is under about 12 years old and parts are available – typically $350 to $750 versus $1,200 to $3,500 for a new installed operator. Once an operator is past 15 years and the board or motor is failing, replacement usually makes more financial sense. We diagnose first and only recommend replacement when repair isn’t the better call.
Can you come out today?
For many Fontana calls, yes – we prioritize gates that won’t open or are stuck mid-travel. Exact same-day availability depends on route and parts. Call (866) 893-2220 and we’ll tell you honestly what’s possible today.
How much does it cost to repair a gate that won’t close?
A gate that won’t close is most often a safety sensor or alignment issue, and those fixes typically run $150 to $400. If the cause is a failed control board or motor limit switch, expect $300 to $700. Call (866) 893-2220 for a free diagnostic quote.
Do you charge more for specific gate brands?
No. We work on the brand you already have, and our pricing is diagnostic-based, not brand-based. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule with the same approach – the only variation is parts cost, which differs by manufacturer.
Whatever your gate is doing – grinding, sagging, stuck open, or refusing to move – the fastest way to a real number is to talk to a specialist. Call our Gate Repair team at (866) 893-2220 for your free estimate. We’re a gate-only shop, so the person who answers knows gates from the motor to the control board.
Pricing reflects the Fontana market as of 2026. Estate Gate Repair offers free estimates – call (866) 893-2220.
What Our Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Daniela Ramirez"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Sarah Novak"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Ramon Hernandez