Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Adelanto
Electric gate repair in Adelanto usually runs $180 – $480 for common fixes like a failed keypad, remote receiver, or safety sensor issue, with full motor and control board replacements starting around $650. Most repairs we handle across the 92301 zip code are done the same day we arrive. If your gate won’t open, call (866) 893-2220 and we’ll tell you over the phone whether it sounds like a board, a motor, or a hinge problem before we ever roll a truck.
We know Adelanto’s lots are different from Victorville’s or Apple Valley’s. They’re bigger, rougher, and often unfinished. The gate on a half-acre dirt lot off Chamberlaine Way is doing heavier work than a gate on a finished tract street, and it fails differently. We see it every week.
We’re a gate-only shop, so we don’t split our attention across garage doors, fencing, or general handyman work. We diagnose, we tell you the number, and we fix it. Electric Gate Repair is what we do all day, every day.
Why Estate Gate Repair Is Adelanto’s Preferred Electric Gate Repair Company
Adelanto homeowners call us because gate repair is the only trade we practice. That matters when your operator is a DoorKing from 2003 and the control board has been discontinued. We don’t have to spend an hour looking up a manual; we’ve already worked on that exact board a dozen times this year across the Adelanto area and the High Desert.
Our reputation here comes down to one thing: we don’t sell replacements you don’t need. When a LiftMaster swing arm bends because the gate post has sagged, the fix is the post, not a $900 new operator. That’s the kind of call we make regularly for properties off Air Base Road and Koala Road.
We keep our response window tight for Adelanto calls, and our technicians carry boards, remotes, photocells, and hinge hardware for the brands we see most out here: Viking, Ghost Controls, DoorKing, and Elite. We arrive ready to work, not ready to quote a part that takes ten days to ship.
Led by Noel Castañeda, our team treats every gate like it’s the one protecting a family’s only access point. Because out here, it often is.
Styles & brands we work with





Electric Gate Motor in Adelanto
An Electric Gate Motor in Adelanto has to work against conditions you won’t find in Rancho Cucamonga or Riverside: wind, sand, caliche, and long runs of unshaded sun. When the motor hums but the gate doesn’t move, or the gate starts and stalls halfway, we’re usually looking at one of three things: a failing capacitor, a stripped gear, or a motor that’s been fighting a sagging gate for so long it’s burned itself out.
Motor replacement on a typical Adelanto swing or slide gate runs $650 – $1,200 installed, depending on the brand and whether we’re rebuilding the post or track at the same time. We quote the number before any work starts, and we don’t change it after the job is underway.
Motor Diagnostics and Replacement
We bench-test your existing motor before recommending replacement. A motor that won’t turn can sometimes be a $40 capacitor rather than a $700 assembly. When we do replace, we install across brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule in Adelanto.
Your gate, our specialty means we’re not going to sell you a motor we happen to stock if your existing one can be rebuilt. Diagnose first, replace only what’s needed.
Gate Access Control in Adelanto
Gate Access Control in Adelanto is a bigger deal than most homeowners expect, because on a large unfinished lot there’s no secondary fence. The gate is the entire security perimeter. A keypad that won’t respond, a receiver that only works from ten feet away, or a control board that drops its memory every power blink means you’re either locked out or driving all the way to the gate and back just to check who’s there.
Access control repair typically runs $150 – $400 depending on what’s failed: a keypad replacement, a new receiver, or a board reprogram. Full system upgrades with new keypad, receiver, and loop detector run higher, but we’ll always give you the exact number before touching anything.
Keypads, Receivers, and Control Boards
We repair and replace keypads, remote receivers, and control boards across every major gate brand. If your keypad works sometimes, it might be the relay, not the keypad. We test that first.
For obsolete boards that are no longer manufactured, we’ll tell you honestly whether a retrofit solution exists or whether you’re money ahead putting that board money toward a new operator. No guessing, no upselling.
Trusted Brands We Service in Adelanto
We work on the brand you already have. That’s the whole point of a gate-only shop. If you’ve got a Viking slide operator on a custom lot off Bartlett Avenue, we service it. If you inherited a Ghost Controls swing opener with a remote that only your former tenant had, we program new ones. DoorKing and Elite commercial-grade operators show up all over Adelanto’s light industrial and RV-storage properties, and we carry the common boards, limits, and remotes for those. From the motor to the control board, if it opens a gate we know how to fix it.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Adelanto Homes
- Sagging gate and dragging hinges from shallow-set posts. The caliche here is brutal. A post set 18 inches into sun-baked hardpan will lean within two years, and the gate starts dragging. We reset posts deeper and re-hang the gate so the operator stops straining.
- Wind-blown sand jamming slide gate tracks and rollers. Big unfenced lots catch the full afternoon wind, and that sand gets into every roller and track. We clean, lube, and replace worn rollers so the gate travels smooth again.
- Obsolete control boards that no longer match modern safety photocells. Homes built in the 1990s and early 2000s often have operators with boards that were discontinued years ago. We’ll identify whether your board can be retrofitted with a compatible photon and keypad, or whether replacement is cheaper.
- Failed safety sensors and photo eyes from UV and dust. Adelanto sun cooks plastic housings, and dust coats the lenses until the sensor reads false obstructions. We replace sensors and re-aim them so your gate stops faulting.
Pricing for Electric Gate Repair in Adelanto, CA
A service call and diagnostic for electric gate repair in Adelanto typically runs $75 – $150 depending on where off the main roads you are, with that waived when you proceed with the repair. Keypad and remote receiver fixes run $150 – $300. Safety sensor replacement runs $180 – $350. Motor replacements run $650 – $1,200 installed. Full control board replacement runs $300 – $850 depending on brand and whether we’re programming a new keypad or receiver at the same time. Every job is quoted and agreed before we start, so the number you approve is the number you pay. Call (866) 893-2220 for a free estimate.
We Also Serve Cities Near Adelanto
Our Electric Gate Repair in Adelanto service area also reaches Victorville, Mountain View Acres, Spring Valley Lake, and Oak Hills. If you’re on the north end of town or east toward the county line, we can likely reach you with the same team and same stocked parts.
Serving Adelanto, CA — Our Local Coverage Area
We’re based in the Adelanto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Adelanto
Yes, in many cases an old board can be retrofitted with compatible safety photocells and a newer keypad receiver, especially on LiftMaster and DoorKing operators from the late 1990s and 2000s. The honest math is this: if the retrofit parts and labor exceed $500 and the motor is also aging, a new operator in the $700 – $1,000 range often makes more sense. We’ll show you both numbers and let you decide. Call (866) 893-2220 and we’ll identify your board over the phone.
Because the hinge post was likely never set below the caliche hardpan. We see this on oversized and unfinished lots all the time. The post looks fine from the surface, but it’s only 18 to 24 inches deep, and the gate’s weight slowly leans it until the gate scrapes the ground. The operator isn’t the problem; the post is. We reset the post deeper and re-hang the gate, and the new operator works like it should.
Probably not if the gate was installed before about 2010. Older gates often lack the non-contact photocell sensors that stop the gate when something crosses the path, and some have single-edge switches that don’t cover the full travel. On an electric gate, you want both entrapment protection and a properly working reverse mechanism. We can audit your existing setup and add what’s missing.
Yes, if the gate frame is rigid and the track can be set on stable ground. Slide operators work well on Adelanto lots with long, open fence lines because they don’t fight the wind as hard as a swing gate. You’ll need a concrete pad for the operator, a ground track or cantilever system, and a power source. We handle the full conversion and can tell you if your existing gate is a good candidate.
We do. Solar gate openers and standalone keypad entry systems are common on Adelanto’s larger properties where running power to the gate isn’t practical. We test the panel output, the battery bank, and the opener’s draw, and we replace what’s actually dead instead of selling a whole new solar kit. Call (866) 893-2220 for an assessment.
Most repairs we complete in one visit, usually two to four hours depending on the failure.
Contact: Call us at (866) 893-2220 for a free estimate on electric gate repair in Adelanto. We will give you a straight number and a straight answer.
Written by Noel Castañeda, Owner at Estate Gate Repair, serving Adelanto and the surrounding High Desert.