Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Corona, CA
Gate installation in Corona runs $1,800 to $8,400 for most residential jobs, with electric driveway gates on the higher end because they include the operator, wiring, and safety components. We’re Estate Gate Repair, and we handle the full scope from the first post hole to the final control board programming. Call (866) 893-2220 for a free estimate. Corona’s mix of 1980s tract homes in Eagle Glen and Sierra Del Oro, plus older mid-century properties near downtown, means most installations are retrofits into existing fence lines rather than clean-slate builds.
Why Corona Homes Are Different
Corona’s location where the 91 and 15 freeways meet creates a dust and vibration environment that punishingly works against gate hardware. Santa Ana wind events push fine grit into track channels and roller bearings on sliding gates, and the hot, dry summers bake powder coatings and warp wooden gate frames. We see the result every week: gates that were installed in the 1990s and early 2000s now sagging, dragging, or binding because their original hardware was never spec’d for this climate.
The older downtown core has its own set of challenges. Many original wrought-iron gates on those narrow lots were built to swing inward, which means a failing hinge post allows the gate to drop and scrape the concrete. That’s a structural repair call, not a simple hardware swap. Meanwhile, the tract home neighborhoods in the 92882, 92883, 92877, and 92878 ZIP codes often have HOA requirements that dictate gate style, height, and even finish color, so installation work often starts with a quick review of what the association will approve rather than just what the homeowner wants.
Styles & brands we work with
Our Main Corona Services
Most homeowners in Corona call us for one of two reasons: a gate that has stopped functioning entirely, or an electric operator that has failed. Here’s what each job looks like in this city.
Gate Repair in Corona
A sagging iron gate in an older Corona neighborhood is rarely a lost cause. We realign hinge posts, weld cracks in the frame, replace worn-out rollers, and re-hang gates so they swing or slide cleanly again. The dust from the freeway corridors means track systems in this city need more frequent roller and bearing replacement than in most of the Inland Empire, and we stock the hardware to do that without waiting on a parts order. Our repair work starts with a diagnosis, not a replacement quote. Learn more about Gate Repair in Corona.
Electric Gate Repair in Corona
When a gate operator stops responding, the cause is almost always in the control board, the motor capacitor, the safety edges, or the power supply, and we diagnose all of it. Corona’s heat pushes electronics hard, especially boards mounted in unvented metal cabinets that sit in direct afternoon sun. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so we can work on the brand you already have. See Electric Gate Repair in Corona for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Corona
Most gate installations in Corona are replacements for original equipment that has outlived its frame, hinges, or motor, and the job is shaped by the lot and the fence line that’s already there. In the older center, we’re often working with narrow, inward-swinging driveway layouts where post placement has to be precise or the gate drags. In Eagle Glen and Sierra Del Oro, the work more often involves sliding gates that need to clear a wider driveway and hold up to years of Santa Ana wind and dust. We handle the full install from layout to final programming, and we’re a Gate Installation specialist, which means the work doesn’t get handed off to a generalist.
Automatic Gate Installation
Signs you need it
You want security and curb presence, and you’re tired of getting out of the car to open the gate manually.
What it costs in Corona
Automatic gate installation in Corona runs $3,200 to $8,400 for a complete system with the motor, control board, safety sensors, and two remotes, plus any gate fabrication.
How we do it
We measure the opening, mount the operator to the gate or post, run the power and control wiring, install the safety edges and photo sensors, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
Your existing gate sags, drags, or binds, or you’re looking to enclose a driveway that’s currently open.
What it costs in Corona
Driveway gate installation in Corona ranges $1,800 to $6,500 depending on material, width, and whether you’re adding an electric operator.
How we do it
We set posts in concrete, hang the gate with adjustable hinges or a track, square the frame so it doesn’t bind, and tie it into any existing fence line.
Electric Gate Installation
Signs you need it
You want remote access to your driveway, or you have a manual gate you’d like to automate.
What it costs in Corona
Electric gate installation in Corona runs $3,200 to $8,400 for a full automation package on a new or existing gate.
How we do it
We install the gate operator, wire it to a dedicated circuit, mount and align the safety edges and photo eyes, and program all remotes, keypads, and any intercom or access system.
What Gate Installation Costs in Corona
| Item | Typical range in Corona |
|---|---|
| Manual driveway gate, no automation | $1,800 – $6,500 |
| Automatic gate installation (operator included) | $3,200 – $8,400 |
| Manual gate only (no operator) | $2,000 – $5,000 |
How long does a gate installation take in Corona?
Most driveway gate installations in Corona take one full day for the gate itself, plus a second visit if we’re running power or automating the system. We set the timeline before any work begins.
Will an automatic gate work during a Santa Ana wind event?
Yes, if the operator is sized correctly and the safety edges are aligned. Corona’s wind pushes debris into the track on sliding gates, so we spec sealed rollers and keep photo-eye mounts clear of dust.
Brands We Service in Corona
We work on LiftMaster, Mighty Mule, and DoorKing operators most frequently in Corona, and we keep boards and remotes for those lines stocked for faster diagnosis. Our technicians are trained across nine major brands, so we’re not tied to one manufacturer’s parts network or availability. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Corona, CA
| Service | Typical range in Corona |
|---|---|
| Automatic gate installation | $3,200 – $8,400 |
| Driveway gate installation | $1,800 – $6,500 |
| Electric gate installation | $3,200 – $8,400 |
| Manual gate only | $2,000 – $5,000 |
| Gate repair | $150 – $700 |
| Electric gate motor repair | $450 – $1,200 |
| Electric gate repair | $450 – $1,200 |
| Control board and electrical | $400 – $1,000 |
Corona’s dust and Santa Ana winds push repair costs toward the middle of these ranges when rollers, hinges, and track channels have to be cleaned or replaced during a service call. Every price is quoted and agreed before any work starts, so the number on the estimate is the number you pay.
Neighborhoods We Serve in Corona
We cover all of Corona, from the older blocks near downtown out to the newer tracts along the 15 corridor. Typical response for a residential call is arranged at the time you call, and we schedule around your availability.
- Eagle Glen
- Sierra Del Oro
- Downtown Corona
- Dos Lagos
- South Corona
Service Area – Cities Near Corona
Beyond Corona, we serve the surrounding communities in the same freeway-corridor market, including Home Gardens, CA, El Cerrito Corona, CA, Eastvale, CA, and Norco, CA. The same dust, wind, and tract-home stock applies across these areas, so the work calls for the same parts and approach.
Serving Corona, CA — Our Local Coverage Area
We’re based in the Corona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Corona
We schedule every Corona visit over the phone, and we’ll work around your day rather than asking you to wait through an eight-hour window. The exact time depends on the work and where it falls in the schedule, but we set it before we roll a truck.
Many of Corona’s tract home communities have HOA design standards that cover gate height, color, and material. We can work from your HOA’s spec sheet and build the gate to match it rather than installing something that has to be redone.
Yes. Sloped lots are common in parts of Corona, and we adjust for grade with swing gates that clear the high side or sliding gates set above the slope. The layout and measurements happen before any concrete is poured, so the gate clears cleanly.
Estate Gate Repair serves Corona from Camp Pendleton North, and we’ve been doing it since 2015. Call (866) 893-2220 for a free estimate, and the price we quote is the price you’ll see before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corona Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Garcia"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Ebony Hampton"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Gilbert Vargas