Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Ontario, CA
Gate installation in Ontario runs $2,800 – $6,400 for most residential driveway gates, with automatic gate systems landing between $4,500 and $11,500 depending on operator brand and access control. We’re Estate Gate Repair, a gate-only company serving Ontario since 2015, and we work on the equipment you already have rather than steering you toward a replacement you don’t need. If your Ontario property needs a gate installed, repaired, or automated, call (866) 893-2220 for a free estimate.
Why Ontario Homes Are Different
Ontario’s gate work is shaped by two distinct property types. The 91761 and 91762 ZIP codes hold post-war tract homes, many built between the 1950s and 1970s, with wrought-iron, chain-link, and ornamental steel driveway gates that have now weathered five or six decades of inland heat. Those gates don’t fail like coastal ones. The Santa Ana winds that sweep through the I-10 corridor rattle and rack aging steel frames, loosening hinge welds and twisting gate leaves until they drag against the ground or jam against the latch post.
Then there’s the industrial side: Ontario’s warehouse and logistics properties along the I-10 and State Route 60 corridor run heavy-duty commercial slide and swing gates under constant truck traffic. A gate that cycles forty times a day in 100-degree heat wears out rollers, bearings, and operator motors far faster than a residential gate that cycles four times. We service both sides of that market, and the diagnosis approach changes accordingly.
Styles & brands we work with
Our Main Ontario Services
Most Ontario calls to our office come down to two situations: a gate that won’t open or close properly, or an automated gate whose electronics have stopped responding. Here’s how we handle each.
Gate Repair in Ontario
When a driveway gate in Ontario’s older neighborhoods starts sagging, sticking, or scraping, the cause is usually structural: hinge wear, frame twisting from wind loading, or post settlement in the dry, compacted soil. We rebuild rather than replace where the steel is sound, and we replace only what a close inspection shows is actually failing. Our trucks carry parts for the gate hardware most common across Ontario’s tract homes and industrial properties, which shortens the time between diagnosis and a working gate.
For the full Ontario repair scope, see Gate Repair in Ontario.
Electric Gate Repair in Ontario
Electric and automated gates fail in three places: the motor, the circuit board, or the wiring and sensors between them. In Ontario, we see a pattern with operator motors that stall against wind-loaded gates during Santa Ana events, and control boards that overheat in direct inland sun when enclosures aren’t vented properly. We carry boards and motors for LiftMaster, DoorKing, Elite, and Mighty Mule systems, which covers most of the automated operators installed across Ontario’s residential and light commercial properties.
Full details on our electrical diagnostic work are on our Electric Gate Repair in Ontario page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Ontario
Gate installation in Ontario means building for the inland climate, not the coast. We spec gate frames, hinges, and operator hardware that can hold up to 100-degree summers and recurring Santa Ana wind gusts that hit older steel gates and twist lighter aluminum frames out of alignment.
A new gate here solves a real security and curb-appeal problem for Ontario’s aging tract-home stock, and for the warehouse and logistics properties near the I-10, it means reliable access control under heavy daily traffic. Since 2015, our installs have covered every ZIP in the city, and we handle the full scope of Gate Installation work, from manual driveway gates to fully automated systems.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand multiple times a day, or you have a gate that predates automation and you want controlled access without getting out of the car.
What it costs in Ontario
Automatic gate installation in Ontario typically runs $4,500 – $11,500 depending on the operator, gate weight, and access-control options.
How we do it
We measure the gate and post layout, mount the operator, run power to the motor, install safety edges and photo sensors, pair remotes or keypads, and test the full cycle until the gate stops and reverses correctly.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the hinges, sagging beyond adjustment, or was never installed with proper post footings for the soil conditions here.
What it costs in Ontario
Driveway gate installation in Ontario generally falls between $2,800 and $6,400 for a single or double steel gate with new posts and hardware.
How we do it
We remove the old gate, set new posts in concrete at the correct depth for Ontario’s dry soil, hang the new gate leaf or leaves, align hinges and latch, and leave the swing path clear and balanced.
What Gate Installation Costs in Ontario
| Item | Typical range in Ontario |
|---|---|
| Driveway gate installation | $2,800 – $6,400 |
| Automatic gate installation | $4,500 – $11,500 |
| Electric gate installation | $3,800 – $9,400 |
What pushes an Ontario install higher is gate weight and the amount of fabrication required on-site, plus whether new electrical service has to be pulled to the gate opening.
Do you handle the full electrical run for a new gate in Ontario?
Yes. We run conduit and power from the nearest source to the gate operator, install the control board, and connect keypads, remotes, and safety sensors. The work is done to code, and we test the full cycle before we leave.
What does a full gate installation include in Ontario?
It includes the gate itself, posts and footings, hinges, latch or lock hardware, and, for automated systems, the operator, controls, safety edges, and wireless access devices. Everything is quoted upfront before we start.
Brands We Service in Ontario
We repair and install automation equipment from the brands Ontario property owners actually have: LiftMaster, DoorKing, Elite, and Mighty Mule. Because gates are our only trade, we keep common boards, motors, and remotes for these systems on our trucks, which means fewer return trips while waiting on parts. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Ontario, CA
| Service | Typical range in Ontario |
|---|---|
| Driveway gate installation | $2,800 – $6,400 |
| Automatic gate installation | $4,500 – $11,500 |
| Electric gate installation | $3,800 – $9,400 |
| Sliding gate installation | $3,200 – $7,800 |
| Gate repair (mechanical) | $180 – $620 |
Ontario prices skew higher when a gate needs structural reinforcement for wind loading, or when a property needs new electrical pulled for an operator. Whatever the final number, we quote it and agree on it before any work starts, so there are no surprises on the invoice.
Neighborhoods We Serve in Ontario
We work across all of Ontario’s ZIP codes from the older tract-home streets of 91761 and 91762 to the newer residential pockets and industrial corridors along the I-10 and SR-60. Response for most repair calls in the city is same-day or next-day depending on parts availability.
- Downtown Ontario and the historic Euclid Avenue corridor
- The residential tracts west of Mountain Avenue in 91762
- Neighborhoods around Chaffey High School and the 91761 ZIP
- Industrial and warehouse properties along the I-10 and SR-60 corridors
- The mixed residential areas of 91764 near the airport
Service Area – Cities Near Ontario
Beyond Ontario, our crews cover the neighboring Inland Empire communities with the same gate-only focus. We service Montclair, CA just to the northwest, Upland, CA north of the 10, and Chino, CA across the 60 to the south. For the foothill properties east of Ontario, see our San Antonio Heights, CA service area.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ontario
Most residential repair calls in Ontario are worked same-day or next-day. Because we’re a gate-only company carrying parts for common Ontario systems like LiftMaster and DoorKing on the truck, we skip the multiday delay of ordering parts after the first visit.
Some Ontario HOAs do have design standards for driveway gates, especially in planned communities. We recommend checking your HOA’s architectural guidelines before an install. We build to your specs and can match common wrought-iron and steel patterns already in your neighborhood.
Yes. We service 91758, 91761, 91762, and 91764, including the warehouse and logistics corridors along the I-10 and SR-60. Commercial slide and swing gates in those areas are a regular part of our workload, not an occasional exception.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ontario Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Ramon Hernandez"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— David Nguyen"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Garcia