Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Upland, CA
Gate installation in Upland runs roughly $4,500 to $18,000 for a complete automated driveway gate, depending on material, length, and operator. Most Upland projects we quote involve either replacing a wind-racked gate on an older north-side ranch property or matching new construction to an HOA’s approved hardware list. Estate Gate Repair has handled gate installation in Upland since 2015, and we work on the brand you already have. Call (866) 893-2220 for a free on-site measure and a written price before any work starts.
Why Upland Homes Are Different
Upland sits at the foot of the San Gabriel Mountains, and the foothill wind corridor that funnels through the north-side neighborhoods in 91784 changes how gates fail here. On the flatter valley side, a gate repair call is often a worn latch or a tired battery. Up against the foothills, it’s wind fatigue: posts leaning out of plumb, hinge barrels ovaled out, operators that have slammed their arms against the stops one too many Santa Ana seasons in a row. We see the same pattern repeat after every major wind event.
The housing stock compounds it. North Upland is full of mid-century and 1970s-80s ranch homes with long driveway gates that were never designed for modern automation hardware. South of the 210, the 91786 side is denser post-1990 tract and HOA development where gate work often has to satisfy a community architectural committee before we bolt anything on. The result is that Upland gate jobs demand both mechanical repair skill and a willingness to work within older hardware – or around strict community rules – rather than just selling a new gate every time. That’s the work we do every week.
Styles & brands we work with
Our Main Upland Services
Most Upland homeowners call us for one of two things: a gate that will not open or close properly, or an electric operator that has stopped responding entirely. Both are covered by the two Upland service pages below.
Gate Repair in Upland
A leaning post or a sagging gate in Upland is rarely a simple hinge adjustment. The dry inland heat warps wood and dries out the soil around posts, and the Santa Ana winds finish the job by racking the gate out of square. We diagnose first, replace only what’s needed, and handle every mechanical component from hinges to post footings. Full details on the mechanical side of gate work are on our Gate Repair in Upland page.
Electric Gate Repair in Upland
When an automated gate stops mid-travel or refuses to respond to a remote, the fault is usually in the motor, the control board, or the safety loop. Upland’s heat and wind put real stress on these components, and older systems from brands that local generalists don’t stock parts for sit dead for weeks. We service Linear, Viking, Ghost Controls, and DoorKing among others. Read more on the Electric Gate Repair in Upland page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Upland
Gate installation in Upland usually means one of two scenarios: replacing a wind-damaged or heat-warped gate on a pre-1990 ranch property, or installing new automation on a south-side HOA lot where the architectural committee has already approved a specific style and hardware finish. The inland climate puts a premium on choosing the right post depth and steel gauge from day one, because a gate that is not built for foothill wind will be leaning within two seasons. The full scope of our installation service is covered on the Gate Installation hub page. Here is what that looks like in Upland.
Automatic Gate Installation
Signs you need it
You’re manually wrestling a gate open and closed every day, or you have an operator that no longer matches the weight of the gate it’s driving.
What it costs in Upland
Automatic gate installation in Upland typically runs $7,500 to $18,000 for a complete system including the gate, operator, and controls.
How we do it
We measure the driveway slope and clearances, set or reinforce the posts, hang the gate, mount the operator, wire the control board and safety loops, and test full open-close cycles before we leave.
Driveway Gate Installation
Signs you need it
Your existing driveway gate has racked out of square from wind, rotted at the base, or no longer matches the scale of your property.
What it costs in Upland
Driveway gate installation in Upland runs $4,500 to $12,000 depending on gate width, material, and whether we’re adding automation.
How we do it
We pull the old gate and hardware, inspect and often replace the posts, build or order the new gate to fit the existing opening, then hang, align, and test it under full travel.
Sliding Gate Installation
Signs you need it
Your driveway has a steep slope or limited swing clearance, making a cantilever or track-style sliding gate the only workable design.
What it costs in Upland
Sliding gate installation in Upland averages $6,000 to $15,000, with the higher end covering longer spans and cantilever hardware.
How we do it
We set the track or cantilever rollers, weld the gate frame to spec, mount the operator and rack, and run enough test cycles to confirm the gate stays square under load.
What Gate Installation Costs in Upland
| Item | Typical range in Upland |
|---|---|
| Manual driveway gate, steel or aluminum | $4,500 – $8,500 |
| Automated driveway gate, single operator | $7,500 – $12,000 |
| Automated sliding or cantilever gate | $10,000 – $18,000 |
How long does gate installation take in Upland?
Most Upland installations run two to five days from post setting to final testing. Custom steel or wood gates add fabrication lead time, so call early if you have an HOA deadline.
Do you handle the HOA approval process for gate installation?
We provide the specs, drawings, and finish samples your community board needs, and we build to the approved standard. You handle the application itself, but we make sure the technical details are correct the first time.
Brands We Service in Upland
We work on the brand you already have. That includes Linear, Viking, Ghost Controls, and DoorKing, plus the rest of the major automation lines. Our Upland trucks carry common control boards, remotes, and safety-loop parts for these systems, which means many repairs are done same-day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Upland, CA
| Service | Typical range in Upland |
|---|---|
| Gate inspection and alignment | $145 – $325 |
| Hinge, latch, or lock repair | $165 – $385 |
| Post reset or reinforcement | $485 – $1,000 |
| Gate wheel, roller, or track repair | $185 – $420 |
| Electric gate diagnostic visit | $95 – $195 |
| Control board replacement | $450 – $1,250 |
| Operator motor replacement | $650 – $1,800 |
| Safety loop or sensor replacement | $350 – $900 |
| Manual driveway gate installation | $4,500 – $8,500 |
| Automated gate installation | $7,500 – $18,000 |
In Upland, the biggest price drivers are post condition and wind exposure. A gate on a north-Upland hillside lot with leaning posts and a tired operator costs more to put right than a simple hinge swap on a flat 91786 tract home. Every job is quoted and agreed in writing before we touch a tool, and the number on the written quote is the number you pay.
Neighborhoods We Serve in Upland
We cover all three Upland ZIP codes: 91784, 91785, and 91786. That includes the older foothill ranch streets north of the 210, the mid-century neighborhoods around San Antonio Heights, and the HOA tracts on the south side. Most Upland calls get a same-day or next-day visit.
- North Upland foothills (91784)
- San Antonio Heights area
- Downtown and historic Upland (91785)
- South Upland HOA tracts (91786)
- Campus and Euclid corridor neighborhoods
Service Area – Cities Near Upland
We also run calls in the communities immediately around Upland. That includes San Antonio Heights, CA just above the foothill bench, Claremont, CA to the west, Montclair, CA to the southwest, and Rancho Cucamonga, CA to the east, where wind and HOA conditions are similar.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Upland
Most Upland addresses get a same-day or next-day visit, depending on call volume and where you sit in the city. The north-side foothill routes take us a bit longer during peak hours, but we run Upland calls every weekday. Call (866) 893-2220 and we’ll give you a straight answer on timing.
Repairs that keep the existing gate and hardware rarely need city approval. If you live in a south Upland HOA community, check your CC&Rs for finish and hardware rules before we replace anything. We can supply spec sheets and material notes if your board asks for them.
We cover 91784, 91785, and 91786, so every part of Upland is in our service area, from the foothill ranches to the south-side HOA tracts. If your gate is on a property just outside city limits, call and we’ll confirm coverage.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Upland Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Sarah Novak"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Ramon Hernandez"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— David Nguyen