Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Bloomington
Electric gate repair in Bloomington usually means one of three things: a motor that stopped responding, a gate that’s physically out of alignment, or a control board that’s tripping for reasons nobody can explain. We handle all three, usually in a single visit. Estate Gate Repair is a gate-only shop, so when you call us about a dead Viking opener or a DoorKing keypad that won’t take a code, you’re talking to someone who works on gates every day, not a generalist squeezing you between a garage door job and a fence quote. Serving all of 92316, we’re the crew Bloomington homeowners call when the gate won’t move and the driveway is blocked. Call (866) 893-2220 for a free estimate.
Why Estate Gate Repair Is Bloomington’s Preferred Electric Gate Repair Company
Most of the gates we repair in Bloomington were installed decades ago, before the area’s wide-lot ranches got their current mix of RVs, trailers, and work trucks. That matters because the operator that worked fine in 1995 is now fighting a gate that’s been hit, welded, extended, or rewired by three different owners. We know what that looks like. We’ve pulled control boards off Bloomington gates that still had handwritten wiring diagrams taped inside the housing. We’re comfortable with that. No city building department oversees this work, so the gate you inherited rarely matches any installation manual.
Our Electric Gate Repair team stocks parts for the brands Bloomington actually uses: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s not a marketing list. It’s the shelf in our truck. When your gate goes down on a Tuesday morning, we don’t want you waiting on a part that ships from Texas.
Styles & brands we work with
Automatic Gate Repair in Bloomington
Automatic gate repair in Bloomington typically involves an older operator on a wide driveway gate that has shifted, sagged, or been knocked out of alignment by a vehicle. The repair usually starts with mechanical correction, re-seating the hinge post, re-aligning the rack, or welding a cracked frame, and then moves to the electrical side: limit switches, control board, safety photocells. A typical automatic gate repair in Bloomington runs $250 – $550 for mechanical realignment and electrical troubleshooting, while a full operator replacement on a double-swing driveway gate lands between $1,200 and $2,800 depending on the motor and the condition of the existing posts.
Legacy Operator Retrofits
We regularly find LiftMaster and FAAC operators from the 1980s and 1990s still in service on Bloomington gates. Many of them run without modern UL 325 entrapment protection because they predate the requirement. The motor may still work, but the control board is obsolete, and replacement boards for those models haven’t been manufactured in years. In most of these cases, we retrofit a modern control board and add safety photocells to the existing gate and posts. That’s usually $400 – $800 in parts and labor, far less than a full replacement.
Field-Modified Gate Wiring
Because Bloomington is unincorporated San Bernardino County, there’s no municipal inspection process for gate work. The previous owner may have spliced in a second keypad, bypassed a safety loop, or wired a Ghost Controls receiver into a Viking control board. We trace these modifications, identify what’s safe to keep, and bring the system up to current safety standards without ripping out everything that still works. That diagnosis-first approach is how we keep repair costs down while making the gate safer than it was before.
Electric Gate Motor in Bloomington
Electric gate motor repair in Bloomington starts with identifying whether the failure is in the motor itself or the control board driving it. In our experience, more than half of the “dead motor” calls we get from Bloomington homes are actually control board failures, a blown capacitor, or a limit switch that lost its calibration. A replacement motor for a sliding gate opener costs $400 – $900 installed. A replacement control board, which is the more common fix, runs $250 – $650. If the motor hums but the gate doesn’t move, that’s usually the capacitor, a $25 part that takes about 20 minutes to swap.
Heat, Wind, and Motor Wear
Bloomington’s inland heat does real work on gate hardware. Metal expands, and a gate that hung clean in March can bind by July. That binding puts extra load on the motor, which trips limit switches and burns out capacitors. The dry Santa Ana winds don’t help. Dust and fine sand work their way into gearboxes and chain drives, accelerating wear on the very parts that have to pull a 400-pound gate every day.
Sliding Gate Rack and Pinion
Sliding gates are common along Bloomington’s long street frontages, and the rack and pinion is their weak point. When the track warps from heat or the post footings shift after winter rains, the gear strips and the motor stalls. In some cases we can re-align the rack and replace the pinion gear for $150 – $350. In others, the entire track needs to be re-set, which puts the job in the $500 – $900 range.
Trusted Brands We Service in Bloomington
We work on the brand you already have. That includes LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t steer Bloomington customers toward one manufacturer or push a full replacement when a retrofit makes more sense. DoorKing and Viking are especially common on the older estate gates in this area, and we keep common control boards, remotes, and safety components for them in local stock. Ghost Controls and Mighty Mule openers show up on a lot of the newer aftermarket installations we see. If you don’t know what brand your gate uses, that’s fine, our technicians identify it on site and go from there.
Common Electric Gate Repair Problems We See in Bloomington Homes
- Bent frames from vehicle strikes: Bloomington driveways are long, and RVs, trailers, and flatbeds turn in from the street at tight angles. A double-swing gate that catches a trailer edge bends at the frame or pulls the hinge post out of plumb. We correct the post, straighten or weld the frame, and then re-calibrate the operator so it doesn’t fight the misalignment.
- Obsolete control boards on legacy operators: LiftMaster and FAAC boards from before the mid-2000s fail after years of heat cycles, and when they die, the gate simply stops. We diagnose whether the board can be rebuilt or retrofitted, and if the replacement part is no longer manufactured, we install a current board that works with your existing motor and remotes.
- Sagging posts and dragging gates: Winter rains in Bloomington erode the soil around post footings, especially on chain-link and wrought-iron frames that were set without deep concrete. A sagging gate drags on the driveway, binds the hinges, and forces the motor to work against the weight. Re-setting a post with new concrete runs $300 – $600 depending on access and gate size.
- Missing or bypassed entrapment protection: Because Bloomington has no building department, many older gates operate without functioning safety photocells or edge sensors. A gate that closes on a child, a pet, or a car doesn’t reverse. We install and wire UL 325-compliant photocells and safety edges on nearly every legacy system we touch, usually for $200 – $400 including parts.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Bloomington, CA
Here’s what Bloomington homeowners can expect to pay for common electric gate repairs. Diagnostic visits run $75 – $150, which is credited toward the repair if you proceed. Replacing a remote or keypad is $75 – $200. A control board replacement or retrofit lands between $250 and $650. Post re-setting and hinge correction on a double-swing driveway gate runs $300 – $600. A full motor and control board replacement starts around $1,200 for a single swing gate and goes up from there for heavy double-swing or sliding systems. On a wide-lot property off Cedar Avenue, a homeowner’s 1980s double-swing gate had been bumped by an RV, skewing the hinge post and bending the frame. We pulled the old LiftMaster operator, corrected the sag with new post footings, and retrofitted a modern control board with safety photocells, restoring smooth operation without replacing the entire gate. Every price is quoted and agreed before any work starts. Call (866) 893-2220 for your free estimate.
We Also Serve Cities Near Bloomington
Estate Gate Repair is based in Fontana, and we run calls throughout the surrounding area. If you’re in Rialto, Glen Avon, or Pedley, we’re close by. Much of our work in Bloomington comes from neighbors recommending us across the Fontana and Rialto line, and we’re glad to take those referrals. Call (866) 893-2220 and we’ll get you on the schedule.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Bloomington
Most of the time, a tripping LiftMaster operator in Bloomington is a fixable control board or limit switch issue, not a dead motor. We can usually repair or retrofit the existing system for $250 – $650. Full replacement only makes sense when the motor itself has failed and the gate frame is beyond correction. We’ll tell you honestly which path costs less over five years. Call (866) 893-2220 and we’ll diagnose it on site.
If your gate was installed or substantially modified after 2001, it should have UL 325 entrapment protection: photocells across the gate opening, a reversing edge on the gate, or both. In Bloomington, where many gates were installed or rewired without any inspection, it’s common to find these components missing or bypassed. We check every system we touch and can add proper safety sensors for $200 – $400. Call (866) 893-2220 to have your gate inspected.
The rack and pinion strips when the gate binds against the track, usually because Santa Ana winds warped the track or winter rains settled the footing. The motor keeps pushing, and the gear is the first thing to give. We re-align the track, re-set the post footings if needed, and replace the stripped gear for $150 – $350. If you keep replacing gears without fixing the track, it’ll happen again. Call (866) 893-2220.
Yes, and in Bloomington we do this constantly. Older gates here have often been extended, rehung, or rewired by a previous owner who may have spliced a new receiver into an old board or welded hardware onto a chain-link frame. We trace the wiring, identify what’s safe, and bring the system up to current safety standards without replacing the entire gate. Call (866) 893-2220 for a free assessment.
The sag is almost always a hinge post that’s out of plumb or a frame that’s been hit and bent. A dragging gate forces the motor to work harder, which shortens its life and blows capacitors. We re-set the post with new concrete and straighten or weld the frame for $300 – $600. Call (866) 893-2220 and we’ll get it swinging clean and level again.
Contact Estate Gate Repair in Bloomington
If your gate won’t open, keeps tripping, or drags on the driveway, call us at (866) 893-2220. We serve all of Bloomington, from the wide-lot properties along Cedar Avenue to the older tract homes closer to the Rialto line. Estimates are free, the price is set before work begins, and we show up with parts for nine major brands on the truck. Your gate, our specialty.
Written by Noel Castañeda, Owner at Estate Gate Repair, serving Bloomington and the surrounding San Bernardino County communities.