Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Clemente, CA
Gate installation in San Clemente means working with salt air, steep lots, and homes that range from 1920s Spanish Colonial cottages to custom bluff-top estates. We measure, fabricate, and install gates that hold up to the marine layer instead of rusting through at the welds within a few years. Estate Gate Repair is a gate-only specialist, so every tool on the truck and every part we stock is there for one reason: your gate. Call (866) 893-2220 for a free measure and written quote.
Why San Clemente Homes Are Different
San Clemente is a coastal town built on bluffs and hillsides, and that geography shapes every gate job we take. The marine layer pushes salt spray into iron hinges, operator housings, and weld joints year-round. In beach-close neighborhoods like the Pier Bowl, we regularly see galvanized gates rust through at the seams within three to five years, which means corrosion prevention is never an add-on here; it is the core of the work. Our techs keep a welder on the truck as standard equipment because so many San Clemente gates need on-site fabrication rather than bolt-on replacement parts.
The housing stock compounds it. A gate on a 1920s Spanish Colonial cottage near the pier is nothing like the gate on a 1960s tract home in Talega, and neither resembles the custom wrought iron on a hillside estate off Avenida Del Mar. Many older properties have bespoke hardware that no off-the-shelf catalog matches. When the grade changes sharply between the street and the driveway, standard gate kits do not fit level, so we cut, shim, and weld to make the gate travel true. Santa Ana winds add another layer: wood gates rack, hinges loosen, and posts drift out of square after a season of dry gusts, which is why wind-load reinforcement is a recurring San Clemente request.
Styles & brands we work with
Our Main San Clemente Services
Most San Clemente homeowners call us for one of two things: a gate that has failed mechanically, or an electric gate operator that has stopped responding. Here is what each involves here.
Gate Repair in San Clemente
Gate repair in San Clemente often starts with rust. Salt air seizes hinge pins, eats through post anchors, and swells wood gates until they drag on the drive. We repair rather than replace whenever the structure is sound – weld repair on iron, re-mortising on wood, replacing only the hardware that has corroded. The grade changes and custom fabrication common to older San Clemente properties mean many repairs are done on-site with the welder and fabrication tools we carry. Gate Repair in San Clemente covers the full scope: hinges, posts, frames, sag correction, and custom hardware repair.
Electric Gate Repair in San Clemente
Electric gate repair in San Clemente is where the marine layer does its quiet damage. Salt fog corrodes limit switch contacts, control board traces, and motor terminals long before the homeowner sees any visible rust. A gate that opens halfway and reverses, a keypad that works intermittently, a motor that hums without moving – these are the failures we diagnose daily. We work on the brand you already have rather than steering you toward a replacement. Electric Gate Repair in San Clemente covers motors, circuit boards, safety edges, remotes, keypads, and the low-voltage wiring that ties them together.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in San Clemente
Gate installation in San Clemente means building for the conditions before the first hinge goes on: rust-resistant materials, wind-load calculations for Santa Ana season, and a mount that works on the slope of your particular lot. We fabricate and install gates that fit the home they guard, from a restored Spanish Colonial near the pier to a modern estate in Talega. Estate Gate Repair handles the complete install – posts, gate, operator, and the safety components that make an automated gate legal and reliable. See our Gate Installation hub for the full process.
Automatic Gate Installation
Signs you need it
You have a manual gate and want remote or keypad access, or you have an older operator that has been repaired twice and still fails during the morning commute.
What it costs in San Clemente
Complete automatic gate installation in San Clemente typically runs $3,500 to $9,500 depending on gate size, operator type, and slope work.
How we do it
We set and brace the posts, hang the gate, mount the operator, pull the low-voltage power run, install safety edges and photo eyes, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
Your driveway is open to street traffic or you want privacy and a clear property line for a home near the beach trail access points.
What it costs in San Clemente
A new driveway gate in San Clemente typically runs $4,000 to $10,000 for a swing or slide gate with manual operation; automation adds operator and electrical costs.
How we do it
We measure the drive width and grade, fabricate the gate to the opening, set reinforced posts, then mount and calibrate hardware so the gate travels clean every cycle.
Gate Installation Services
Signs you need it
Your existing gate has rust-through at the frame, a post has shifted out of square, or you are building new and need a gate set into a fresh wall or fence run.
What it costs in San Clemente
Basic gate installation services in San Clemente start around $3,500 for a single swing gate, with custom iron and hillside work pushing toward $10,000.
How we do it
We handle the full scope – demo of the old gate, post setting with proper embedment, fabrication, hanging, and final adjustment.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street or there is no room for a swing gate to arc, common on the tight lots above Pacific Coast Highway.
What it costs in San Clemente
Sliding gate installation in San Clemente typically runs $5,500 to $10,000 due to the track, rollers, and heavier framing required.
How we do it
We set the track on a level bed or cantilever the gate off rollers, mount the frame, and test the travel path repeatedly before wiring any operator.
What Gate Installation Costs in San Clemente
| Item | Typical range in San Clemente |
|---|---|
| Manual swing gate, single leaf | $3,500 – $6,000 |
| Automatic gate, complete with operator | $3,500 – $9,500 |
| Custom sliding gate with track work | $5,500 – $10,000 |
Do you handle the full installation or just the gate?
We handle the entire install – posts, gate, operator, safety edges, photo eyes, and low-voltage power. You deal with one specialist from measurement to final programming, and the price is agreed before any work starts.
Can you match the look of an older San Clemente home?
Yes. We fabricate to match existing ironwork, wood profiles, and hardware styles, which matters on Spanish Colonial and custom estate gates where catalog parts look wrong. Call (866) 893-2220 for an exact quote after a free measure.
Brands We Service in San Clemente
We repair and install operators from DoorKing, Elite, Mighty Mule, and LiftMaster, among others. Because gates are our only trade, we keep common control boards, limit switches, and remote kits on the truck for these brands, which shortens the repair timeline on most San Clemente calls. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Clemente, CA
| Service | Typical range in San Clemente |
|---|---|
| Gate repair, hinge and post work | $220 – $550 |
| Electric gate repair, circuit board | $350 – $900 |
| Electric gate operator replacement | $1,200 – $3,200 |
| Manual swing gate installation | $3,500 – $6,000 |
| Automatic gate installation | $3,500 – $9,500 |
| Sliding gate installation | $5,500 – $10,000 |
| Driveway gate installation | $4,000 – $10,000 |
| Rust treatment and weld repair | $280 – $700 |
Two things push cost up in San Clemente faster than anywhere inland: salt-corrosion repair that requires cutting out and re-welding sections, and the steep-grade fabrication work common on hillside lots. Every price is quoted and agreed in writing before we start, and the range you approve is the range you pay.
Neighborhoods We Serve in San Clemente
We work across all three San Clemente ZIP codes, 92672, 92673, and 92674. Response time varies with our current schedule, but most San Clemente calls get same-week service, with repair calls prioritized when a gate is stuck closed.
- Pier Bowl
- Talega
- Shore Cliffs
- Forster Ranch
- Southwest San Clemente
Service Area – Cities Near San Clemente
Estate Gate Repair runs calls throughout southern Orange County. If you are in Ladera Ranch, CA, Laguna Beach, CA, Laguna Hills, CA, or Coto De Caza, CA, we cover those areas as well. Same specialist, same gate-only focus.
Serving San Clemente, CA — Our Local Coverage Area
We’re based in the San Clemente area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Clemente
We build to San Clemente municipal code and HOA standards where they apply, and we can advise on what your association requires before work starts. The approval timeline belongs to the HOA, not to us, so we plan around it rather than promising dates we cannot control.
Repair calls get priority scheduling, especially when a gate is stuck closed and you cannot get a car in or out. Most San Clemente customers are seen within the same week, and we stock common parts locally to avoid waiting on out-of-state shipments.
Yes. We cover 92672, 92673, and 92674, from the beach-close neighborhoods to Talega and the hillside estates. The terrain changes a lot within those ZIP codes, and we carry the equipment to work on steep lots without cutting corners on the gate itself.
If your gate is rusted through, dragging, or refusing to open, call (866) 893-2220. Estate Gate Repair is the gate-only specialist for San Clemente, and every quote is free, written, and fixed before work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Clemente Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Garcia"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Ebony Hampton"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Gilbert Vargas