Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Brea, CA
Gate installation in Brea means building for wind, dry soil, and a housing stock that ranges from 1960s tract homes to foothill properties with long driveways and estate-sized openings. We install gates that stay square through Santa Ana events and operate reliably in heat that bakes exposed hardware all summer. From a side-yard RV gate in 92821 to a full automated driveway gate in 92823, we quote the job, install it, and stand behind the work. Call (866) 893-2220 for a free estimate.
Why Brea Homes Are Different
Brea’s residential neighborhoods sit on the north Orange County foothills, and the Santa Ana winds that funnel through the canyons change how gates need to be built here. A gate that’s fine in a flat, sheltered city will rack and sag in Brea if the posts aren’t set deep enough and the hinges aren’t sized for wind load. We regularly see double gates that have pulled their hinge screws out of weathered wood posts after a strong wind event, especially in the older tracts where original gates were anchored into posts set decades ago in concrete that has since cracked and shifted.
The housing stock itself spans two realities. The 1960s and 1970s neighborhoods are full of original gates on wood posts that have rotted at the soil line or drifted out of plumb. The newer foothill properties have long driveways, side yards built for RV access, and iron or vinyl estate gates that need proper clearance, operator sizing, and sometimes a slide track instead of a swing. Hot, dry summers add another layer: UV exposure fades and cracks vinyl and wood faster here than in coastal cities, and metal components expand and contract enough over the years that welds and fasteners fatigue. A Brea gate installation has to account for all of it at once.
Styles & brands we work with
Our Main Brea Services
Most calls from Brea homeowners start with one of two problems: a gate that won’t move, or an automatic opener that has stopped responding. Here’s how each works.
Gate Repair in Brea
Brea gate failures tend to be structural before they’re mechanical. Wind stress pulls hinges out of alignment, rotted posts let gates drop, and dry soil shifts what the post is anchored into. We repair the gate itself first: re-plumbing posts, replacing hinges and hardware, welding cracked frames, and re-setting what has moved. Then we address the operator if it’s been fighting a gate that’s out of square. For a full picture of what we fix and what it costs in Brea, see our dedicated page: Gate Repair in Brea.
Electric Gate Repair in Brea
Automated gate systems in Brea take a beating from heat, dust, and wind-driven debris. Circuit boards overheat in direct sun, limit switches drift, and motors burn out trying to push against a gate that wind has knocked off its track. We diagnose the control board, motor, sensors, and power supply as one system, then replace only what has actually failed. If your opener is dead or your gate reverses mid-cycle, this is the service. Electric Gate Repair in Brea has the details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Brea
Gate installation in Brea means building for the wind, the soil, and the way the house was laid out. A 1970s tract home with a shifting wood post needs a different job than a foothill estate with a long driveway and a 16-foot opening. Heat, UV, and Santa Ana gusts decide what posts, hinges, and operator get specified. We build gates that stay plumb, open smoothly, and hold up through every season Brea throws at them. Our full installation scope is on Gate Installation.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a heavy gate, or your existing opener is undersized and struggling with a gate that catches the wind.
What it costs in Brea
Automatic gate installation in Brea typically runs between $1,800 and $7,500 for the full job, depending on gate type, operator class, and whether new power wiring is required.
How we do it
We measure the opening, check the gate’s weight and swing, spec an operator that matches the actual load, pour or reinforce the pad, run power and safety devices, mount the operator, and dial in speed, force, and limits.
Driveway Gate Installation
Signs you need it
Your driveway is exposed to the street, you want controlled access, or you need a gate wide enough for vehicles but strong enough for Brea’s wind.
What it costs in Brea
Driveway gate installation in Brea typically falls between $1,500 and $7,000, with high-end iron or custom-width gates running higher depending on span and operator options.
How we do it
We set steel posts in concrete at the correct depth for the slope and wind exposure, hang the gate with adjustable hinges, verify clearance at both ends of travel, and wire the operator and safety edges before final testing.
What Gate Installation Costs in Brea
| Item | Typical range in Brea |
|---|---|
| Standard single swing gate | $350 – $1,200 |
| Double swing or sliding estate gate | $800 – $3,500 |
| Full automatic operator installation | $800 – $3,000 |
These are the core line items. Final quotes depend on the gate material, the opening width, whether we’re running new conduit, and how much post work the soil and existing concrete demand. Every Brea installation is quoted and agreed before any work starts.
How long does gate installation take in Brea?
Most Brea gate installations take one to three days once materials are on site. Custom iron gates or slide tracks add fabrication lead time. We’ll give you a written schedule with the quote.
Do I need a permit for a gate in Brea?
Many Brea installations need no permit, but electric operators and certain front-yard or height conditions can trigger city requirements. We’ll check the local rules for your exact address and handle what’s needed before the install date. Call (866) 893-2220 to confirm your situation.
Brands We Service in Brea
We work on the gate operator you already have. Our Brea techs carry parts and diagnostic equipment for Linear, Viking, Ghost Controls, and DoorKing systems among the brands we support. Most brand-specific component swaps are done in one visit. See our brands for the full coverage list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Brea, CA
| Service | Typical range in Brea |
|---|---|
| Gate repair service call | $75 – $150 |
| Hinge replacement | $150 – $350 |
| Gate post re-setting | $200 – $600 |
| Electric gate circuit board replacement | $250 – $550 |
| Gate motor replacement | $350 – $900 |
| Standard single swing gate installation | $350 – $1,200 |
| Double swing or sliding gate installation | $800 – $3,500 |
| Automatic operator installation | $800 – $3,000 |
Brea prices push toward the upper end when wind exposure requires heavier posts, when old concrete has to be broken out and re-poured, or when an existing operator is an older brand that needs more diagnostic time. Whatever the number, it’s agreed before the first tool comes off the truck.
Neighborhoods We Serve in Brea
We cover all three Brea ZIP codes and the neighborhoods within them, from the older tract pockets to the foothill custom-home streets. Same-week scheduling is typical for installed work, and repair calls are usually booked within a few business days.
- Brea Hills
- Country Hills
- Olinda Ranch
- Craig Park area (92821)
- Brea Canyon foothill streets (92823)
Service Area – Cities Near Brea
Our gate crews also serve the surrounding north Orange County cities. If you’re a few minutes away, we’ll still come out. Nearby coverage includes Placentia, CA, Fullerton, CA, Yorba Linda, CA, and La Habra, CA.
Serving Brea, CA — Our Local Coverage Area
We’re based in the Brea area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Brea
Yes. We service every Brea ZIP code from 92821 through 92823, including the foothill streets where driveways are steeper and jobs take longer. There’s no extra charge for distance within Brea.
Most Brea HOAs have rules about gate height, material, and color matching. We install to those standards every week and can work from your HOA’s spec sheet. Send us the requirements with your photos and we’ll quote accordingly.
Repair visits are typically scheduled within a few business days. Installations depend on material availability and permitting. Call (866) 893-2220 and we’ll give you the first available window for your neighborhood.
Need a gate built, repaired, or automated in Brea? Call (866) 893-2220 for a free estimate. We’ll inspect the site, quote the exact work, and schedule it around your availability.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brea Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— David Nguyen"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Garcia"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Ebony Hampton